2018•Jurnal ILMU DASAROpen access

Synthesis of Zeolite A From Coal Fly Ash with Variation of Si/Al Molar Ratio

Novita Andarini, Tanti Haryati, Zuhrotul Lutfia

Open full text 4 citations

Abstract

Fly ash containing 30-36% silica and 14,52-23,78% alumina can be potentially as raw material for synthetic zeolite such as zeolite A. Zeolite A is an aluminosilicate mineral which is rich in alumina so that this zeolite has a good cation exchange capability. Zeolite A has been synthesized by hydrothermal treatment after NaOH fusion. Fly ash has been fused with NaOH at 550 0C for 40 minutes and hydrothermally treated at 1000C for 5 hours. The hydrothermal treatment was conducted in some various Si/Al molar ratios from 0.90; 1.00.; 1.05; to 1.24. The zeolite A was then analyzed using XRD and XRF. The best zeolite A based on XRD result is zeolite with Si/Al molar ratio of 1.1 with crystallinity of 96,80%. The x-ray fluorescence result showed that the Si/Al molar ratios of the four zeolite samples were close to of Si/Al molar ratios of 1, 1.1, 1.21.3 respectively.Keywords: Fly ash, Zeolite A, Hydrothermal Fusion

Open-access reader

About this research paper

What this paper is about

Fly ash containing 30-36% silica and 14,52-23,78% alumina can be potentially as raw material for synthetic zeolite such as zeolite A. Zeolite A is an aluminosilicate mineral which is rich in alumina so that this zeolite has a good cation exchange capability. Zeolite A has been synthesized by hydrothermal treatment after NaOH fusion. Fly ash has been fused with NaOH at 550 0C for 40 minutes and hydrothermally treated at 1000C for 5 hours. The hydrothermal treatment was conducted in some various Si/Al molar ratios from 0.90; 1.00.; 1.05; to 1.24. The zeolite A was then analyzed using XRD and XRF. The best zeolite A based on XRD result is zeolite with Si/Al molar ratio of 1.1 with crystallinity of 96,80%. The x-ray fluorescence result showed that the Si/Al molar ratios of the four zeolite samples were close to of Si/Al molar ratios of 1, 1.1, 1.21.3 respectively.Keywords: Fly ash, Zeolite A, Hydrothermal Fusion

Why it matters

OpenAlex reports 4 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Fly ash containing 30-36% silica and 14,52-23,78% alumina can be potentially as raw material for synthetic zeolite such as zeolite A. Zeolite A is an aluminosilicate mineral which is rich in alumina so that this zeolite has a good cation exchange capability. Zeolite A has been synthesized by hydrothermal treatment after NaOH fusion. Fly ash has been fused with NaOH at 550 0C for 40 minutes and hydrothermally treated at 1000C for 5 hours. The hydrothermal treatment was conducted in some various Si/Al molar ratios from 0.90; 1.00.; 1.05; to 1.24. The zeolite A was then analyzed using XRD and XRF. The best zeolite A based on XRD result is zeolite with Si/Al molar ratio of 1.1 with crystallinity of 96,80%. The x-ray fluorescence result showed that the Si/Al molar ratios of the four zeolite samples were close to of Si/Al molar ratios of 1, 1.1, 1.21.3 respectively.Keywords: Fly ash, Zeolite A, Hydrothermal Fusion

Key concepts: Zeolite, Fly ash, Aluminosilicate, Crystallinity, Hydrothermal circulation, Materials science, Molar ratio, Nuclear chemistry

Related papers

Back to paper searchBrowse research topicsOriginal source
Synthesis of Zeolite A From Coal Fly Ash with Variation of Si/Al Molar Ratio — Research Paper | ScholarLens