2018Meteoritics and Planetary ScienceRequires access

Subsurface deformation of experimental hypervelocity impacts in quartzite and marble targets

Rebecca Winkler, R. Luther, M. H. Poelchau, K. Wünnemann, T. Kenkmann

Open publisher page 27 citations

Abstract

Abstract Two impact cratering experiments on nonporous rock targets were carried out to determine the influence of target composition on the structural mechanisms of subsurface deformation. Projectiles of 2.5 mm diameter were accelerated to ~5 km s−1 and impacted onto blocks of marble or quartzite. Subsurface deformation was mapped and analyzed on the microscale using thin sections of the bisected craters. Additionally, both experiments were modeled and the calculated strain zones underneath the craters were compared to experimental deformation features. Microanalysis shows that the formation of radial, tensile, and intragranular cracks is a common response of both nonporous materials to impact cratering. In the quartzite target, the subsurface damage is additionally characterized by highly localized deformation along shear bands with intense grain comminution, surrounded by damage zones. In contrast, the marble target shows closely spaced calcite twinning and cleavage activation. Crater diameter and depth as well as the damage lens underneath the crater are unexpectedly smaller in the marble target compared to the quartzite target, which is in contradiction to the marble's much weaker compressive and tensile strengths. However, numerical models result in craters that are similar in size as well as in strain accumulation at the end of transient crater formation, indicating that current models should still be viewed cautiously when compared to experimental details.

About this research paper

What this paper is about

Abstract Two impact cratering experiments on nonporous rock targets were carried out to determine the influence of target composition on the structural mechanisms of subsurface deformation. Projectiles of 2.5 mm diameter were accelerated to ~5 km s−1 and impacted onto blocks of marble or quartzite. Subsurface deformation was mapped and analyzed on the microscale using thin sections of the bisected craters. Additionally, both experiments were modeled and the calculated strain zones underneath the craters were compared to experimental deformation features. Microanalysis shows that the formation of radial, tensile, and intragranular cracks is a common response of both nonporous materials to impact cratering. In the quartzite target, the subsurface damage is additionally characterized by highly localized deformation along shear bands with intense grain comminution, surrounded by damage zones. In contrast, the marble target shows closely spaced calcite twinning and cleavage activation. Crater diameter and depth as well as the damage lens underneath the crater are unexpectedly smaller in the marble target compared to the quartzite target, which is in contradiction to the marble's much weaker compressive and tensile strengths. However, numerical models result in craters that are similar in size as well as in strain accumulation at the end of transient crater formation, indicating that current models should still be viewed cautiously when compared to experimental details.

Why it matters

OpenAlex reports 27 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Abstract Two impact cratering experiments on nonporous rock targets were carried out to determine the influence of target composition on the structural mechanisms of subsurface deformation. Projectiles of 2.5 mm diameter were accelerated to ~5 km s−1 and impacted onto blocks of marble or quartzite. Subsurface deformation was mapped and analyzed on the microscale using thin sections of the bisected craters. Additionally, both experiments were modeled and the calculated strain zones underneath the craters were compared to experimental deformation features. Microanalysis shows that the formation of radial, tensile, and intragranular cracks is a common response of both nonporous materials to impact cratering. In the quartzite target, the subsurface damage is additionally characterized by highly localized deformation along shear bands with intense grain comminution, surrounded by damage zones. In contrast, the marble target shows closely spaced calcite twinning and cleavage activation. Crater diameter and depth as well as the damage lens underneath the crater are unexpectedly smaller in the marble target compared to the quartzite target, which is in contradiction to the marble's much weaker compressive and tensile strengths. However, numerical models result in craters that are similar in size as well as in strain accumulation at the end of transient crater formation, indicating that current models should still be viewed cautiously when compared to experimental details.

Key concepts: Impact crater, Geology, Hypervelocity, Deformation (meteorology), Calcite, Deformation mechanism, Ultimate tensile strength, Mineralogy

Related papers

Back to paper searchBrowse research topicsOriginal source
Subsurface deformation of experimental hypervelocity impacts in quartzite and marble targets — Research Paper | ScholarLens