Extraction and Assessment of Physicochemical Properties of Rosigold Mango (Mangifera indica) Seed Kernel Oil for Bioresin Production

This paper presents research report on extraction and assessment of physicochemical properties of Rosigold mango kernel oil. This is with a view to using the oil for bioresin production so as to mitigate some of the problems associated with petrochemical resins currently used for bulk of composite production activities. The seeds of the mango were identified and collected from the wastes discarded by marketers and consumers in Bauchi town. The Oil was obtained using soxhlet extraction with n-Hexane as solvent. The oil was characterized for yield, relative density, free fatty acid value, acid value, iodine value, and saponification value. Mean values of the characteristic parameters were: oil yield 19.6%, relative density 0.874 g/cm3, free fatty acid value 3.09 mg NaOH/g oil, acid value 6.18 mg KOH/g oil, iodine value 60.7 mg iodine/100 g oil and saponification value 143.6 mg KOH/ g oil. Analysis and comparison of these results with the physicochemical properties of palm oil, Soya bean oil and Hemp seed oil respectively, revealed that the iodine value of Rosigold mango seed kernel oil is higher than palm oil, but lower than Soya bean and Hemp seed oils respectively. Bioresin production is heavily dependent on the degree of unsaturation of the oil which is reflected by the iodine value. However, the overall results suggested that Rosigold mango seed kernel oil is suitable for bioresin production since the minimum iodine bench mark for renewable oil suitable for bioresin production is 50 mg iodine/100 g oil. The extracted oil has an added advantage in that the source (mango seed) is a waste material that is readily available, affordable and sustainable in Nigeria and many other countries.