2017•한국생활환경학회지Requires access

CFD를 이용한 맨홀내의 하수 유동 해석

조현, 안혜린, 방승기

Open publisher page 0 citations

Abstract

In this paper, a simulation was carried out to ascertain the status of water level rise and drainage in the manhole according to sewage inflow. Simulation was performed on five cases by combining 100%, 50% and 0% of sewage flowing in two sewer pipes. In case 3, which has the largest influent flow rate, the influent flow rate is 1,314 liters/ min more than the outflow flow rate, and when the maximum duration of inflow flow is 15 minutes (900 seconds), the water level in the manhole is increased by 2,400 mm. In the case of 100% and 0% of sewage inflows to the inflow sewer pipes (D400 and D900), 100% of the inflow sewage is discharged and there is no rise of the water level in the sewage manholes.

About this research paper

What this paper is about

In this paper, a simulation was carried out to ascertain the status of water level rise and drainage in the manhole according to sewage inflow. Simulation was performed on five cases by combining 100%, 50% and 0% of sewage flowing in two sewer pipes. In case 3, which has the largest influent flow rate, the influent flow rate is 1,314 liters/ min more than the outflow flow rate, and when the maximum duration of inflow flow is 15 minutes (900 seconds), the water level in the manhole is increased by 2,400 mm. In the case of 100% and 0% of sewage inflows to the inflow sewer pipes (D400 and D900), 100% of the inflow sewage is discharged and there is no rise of the water level in the sewage manholes.

Why it matters

A significance statement is not available in the OpenAlex record.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

In this paper, a simulation was carried out to ascertain the status of water level rise and drainage in the manhole according to sewage inflow. Simulation was performed on five cases by combining 100%, 50% and 0% of sewage flowing in two sewer pipes. In case 3, which has the largest influent flow rate, the influent flow rate is 1,314 liters/ min more than the outflow flow rate, and when the maximum duration of inflow flow is 15 minutes (900 seconds), the water level in the manhole is increased by 2,400 mm. In the case of 100% and 0% of sewage inflows to the inflow sewer pipes (D400 and D900), 100% of the inflow sewage is discharged and there is no rise of the water level in the sewage manholes.

Key concepts: Inflow, Sewage, Outflow, Environmental science, Drainage, Hydrology (agriculture), Flow (mathematics), Environmental engineering

Back to paper searchBrowse research topicsOriginal source
CFD를 이용한 맨홀내의 하수 유동 해석 — Research Paper | ScholarLens