ScholarLens Back to search
2017•Anadolu University Journal of Science and Technology-A Applied Sciences and EngineeringOpen access

EFFECT OF RIVETING ON THE JOINT STRENGTH OF ADHESIVELY BONDED DOUBLE LAP JOINTS

İbrahim Kocabaş, Murat Yavuz Solmaz, Mustafa Gür

Open full text 2 citations

Abstract

The scope of this study, is to determine the effectiveness of using rivets in the adhesive joints in order to combine plastic based composite materials which are often used in today's engineering structures, to the joint strength. For this purpose, double lap joints are prepared in 3 different types of configuration included adhesive, pinned and both adhesive and pinned and also prepared in 3 different overlap lengths as 30, 45 and 60 mm. Stress-strain diagrams were derived by exposing the joints obtained, to the axial tensile test and then the most appropriate joint type was determined by comparing each of the results obtained. The evaluation of the results pointed out that the hybrid joints where adhesive and rivet are used together, can carry much more load than the joints where only adhesive was used or the joints which are combined with rivet in terms of joint strength.

Open-access reader

About this research paper

What this paper is about

The scope of this study, is to determine the effectiveness of using rivets in the adhesive joints in order to combine plastic based composite materials which are often used in today's engineering structures, to the joint strength. For this purpose, double lap joints are prepared in 3 different types of configuration included adhesive, pinned and both adhesive and pinned and also prepared in 3 different overlap lengths as 30, 45 and 60 mm. Stress-strain diagrams were derived by exposing the joints obtained, to the axial tensile test and then the most appropriate joint type was determined by comparing each of the results obtained. The evaluation of the results pointed out that the hybrid joints where adhesive and rivet are used together, can carry much more load than the joints where only adhesive was used or the joints which are combined with rivet in terms of joint strength.

Why it matters

OpenAlex reports 2 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

The scope of this study, is to determine the effectiveness of using rivets in the adhesive joints in order to combine plastic based composite materials which are often used in today's engineering structures, to the joint strength. For this purpose, double lap joints are prepared in 3 different types of configuration included adhesive, pinned and both adhesive and pinned and also prepared in 3 different overlap lengths as 30, 45 and 60 mm. Stress-strain diagrams were derived by exposing the joints obtained, to the axial tensile test and then the most appropriate joint type was determined by comparing each of the results obtained. The evaluation of the results pointed out that the hybrid joints where adhesive and rivet are used together, can carry much more load than the joints where only adhesive was used or the joints which are combined with rivet in terms of joint strength.

Key concepts: Rivet, Joint (building), Adhesive, Lap joint, Materials science, Structural engineering, Ultimate tensile strength, Composite material

Related papers

Related paper 1Related paper 2Related paper 3
Back to paper searchBrowse research topicsOriginal source
EFFECT OF RIVETING ON THE JOINT STRENGTH OF ADHESIVELY BONDED DOUBLE LAP JOINTS — Research Paper | ScholarLens