2017•Journal of Physics Conference SeriesOpen access

Preliminary study of degradation from neutron effects of core-structural materials of Thai Research Reactor TRR-1/M1

Pantip Ampornrat, P Boonsuwan, S Sangkaew, T Angwongtrakool

Open full text 1 citations

Abstract

Thai research reactor went first critical in 1962. The reactor was converted in 1977 from an MTR-type with high-enriched uranium fuel to a TRIGA-MARK III type using low-enriched uranium fuel, called TRR-1/M1. Since the TRR-1/M1 has been operated for almost 40 years, degradation of reactor structural materials is expected. In this preliminary study, the potential degradation from neutron effects of core-structural materials, e.g., fuel clad (SS304) and core components (Al6061) were studied. Assessment included calculation of neutron energy, flux and fluence in the reactor core to evaluate displacement rate (dpa) and irradiation effects on the material properties. Results showed maximum displacement rates on SS304 was 5.24 × 10 -8 per cm 3 ·sec and on Al6061 was 1.14 × 10 -8 per cm 3 ·sec. The corresponding maximum displacement levels were ∼17 dpa for SS304, and ∼4 dpa for Al6061. At these levels of displacement, it is possible for the materials to result in tensile strength increasing and ductility reduction. Further inspection on the core-structural materials needs to be conducted to validate the assessment results from this study.

Open-access reader

About this research paper

What this paper is about

Thai research reactor went first critical in 1962. The reactor was converted in 1977 from an MTR-type with high-enriched uranium fuel to a TRIGA-MARK III type using low-enriched uranium fuel, called TRR-1/M1. Since the TRR-1/M1 has been operated for almost 40 years, degradation of reactor structural materials is expected. In this preliminary study, the potential degradation from neutron effects of core-structural materials, e.g., fuel clad (SS304) and core components (Al6061) were studied. Assessment included calculation of neutron energy, flux and fluence in the reactor core to evaluate displacement rate (dpa) and irradiation effects on the material properties. Results showed maximum displacement rates on SS304 was 5.24 × 10 -8 per cm 3 ·sec and on Al6061 was 1.14 × 10 -8 per cm 3 ·sec. The corresponding maximum displacement levels were ∼17 dpa for SS304, and ∼4 dpa for Al6061. At these levels of displacement, it is possible for the materials to result in tensile strength increasing and ductility reduction. Further inspection on the core-structural materials needs to be conducted to validate the assessment results from this study.

Why it matters

OpenAlex reports 1 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Thai research reactor went first critical in 1962. The reactor was converted in 1977 from an MTR-type with high-enriched uranium fuel to a TRIGA-MARK III type using low-enriched uranium fuel, called TRR-1/M1. Since the TRR-1/M1 has been operated for almost 40 years, degradation of reactor structural materials is expected. In this preliminary study, the potential degradation from neutron effects of core-structural materials, e.g., fuel clad (SS304) and core components (Al6061) were studied. Assessment included calculation of neutron energy, flux and fluence in the reactor core to evaluate displacement rate (dpa) and irradiation effects on the material properties. Results showed maximum displacement rates on SS304 was 5.24 × 10 -8 per cm 3 ·sec and on Al6061 was 1.14 × 10 -8 per cm 3 ·sec. The corresponding maximum displacement levels were ∼17 dpa for SS304, and ∼4 dpa for Al6061. At these levels of displacement, it is possible for the materials to result in tensile strength increasing and ductility reduction. Further inspection on the core-structural materials needs to be conducted to validate the assessment results from this study.

Key concepts: Research reactor, Materials science, TRIGA, Nuclear engineering, Neutron flux, Core (optical fiber), Uranium, Structural material

Related papers

Back to paper searchBrowse research topicsOriginal source
Preliminary study of degradation from neutron effects of core-structural materials of Thai Research Reactor TRR-1/M1 — Research Paper | ScholarLens