2012•Unpublished venueRequires access

Changes in the quality of palm oil mill effluent (POME) under aerobic treatment

Gilbert Kalaween, Anak Mangga

Open publisher page 1 citations

Abstract

Malaysia is a rapid growing country. The economy of Malaysia is mostly depends on production of palm oil. However, the production of crude palm oil will also give side effect which is the Palm oil mill effluent (POME). This type of product can pollute our environment. Therefore, the palm oil mill waste management must know how to treat the POME before it is being discharged. POME has high BOD, COD, Oil and Grease, TSS and VSS value. In this project, the raw POME was subjected into 550C temperature and the sample was aerated by using air pump. The POME that had been subjected into that condition is monitored in its quality changes for four consecutive weeks. Parameters such as BOD, COD, Oil and Grease, TSS and VSS have been conducted. The pattern for the changes of BOD, COD and Oil and Grease is decreasing with time. As the time increased, the value of BOD, COD and Oil and Grease decreased. However, for TSS and VSS, both of it show increase in value as the time increased.

About this research paper

What this paper is about

Malaysia is a rapid growing country. The economy of Malaysia is mostly depends on production of palm oil. However, the production of crude palm oil will also give side effect which is the Palm oil mill effluent (POME). This type of product can pollute our environment. Therefore, the palm oil mill waste management must know how to treat the POME before it is being discharged. POME has high BOD, COD, Oil and Grease, TSS and VSS value. In this project, the raw POME was subjected into 550C temperature and the sample was aerated by using air pump. The POME that had been subjected into that condition is monitored in its quality changes for four consecutive weeks. Parameters such as BOD, COD, Oil and Grease, TSS and VSS have been conducted. The pattern for the changes of BOD, COD and Oil and Grease is decreasing with time. As the time increased, the value of BOD, COD and Oil and Grease decreased. However, for TSS and VSS, both of it show increase in value as the time increased.

Why it matters

OpenAlex reports 1 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Malaysia is a rapid growing country. The economy of Malaysia is mostly depends on production of palm oil. However, the production of crude palm oil will also give side effect which is the Palm oil mill effluent (POME). This type of product can pollute our environment. Therefore, the palm oil mill waste management must know how to treat the POME before it is being discharged. POME has high BOD, COD, Oil and Grease, TSS and VSS value. In this project, the raw POME was subjected into 550C temperature and the sample was aerated by using air pump. The POME that had been subjected into that condition is monitored in its quality changes for four consecutive weeks. Parameters such as BOD, COD, Oil and Grease, TSS and VSS have been conducted. The pattern for the changes of BOD, COD and Oil and Grease is decreasing with time. As the time increased, the value of BOD, COD and Oil and Grease decreased. However, for TSS and VSS, both of it show increase in value as the time increased.

Key concepts: Pome, Grease, Environmental science, Pulp and paper industry, Wastewater, Waste management, Palm oil, Effluent

Related papers

Back to paper searchBrowse research topicsOriginal source
Changes in the quality of palm oil mill effluent (POME) under aerobic treatment — Research Paper | ScholarLens