Research of Deformation Law on High Manganese Steel with Different Alloy Composition

The organizations and phase composition after forging and heat treatment of the stacking fault energy for the three high manganese steel with 2.99 mJ/m2,7.9 mJ/m2and23 mJ/m2 were observed. It’s analysised that the microstructure and orientation change of three high manganese steel by SEM and EBSD and the effect of alloy elements and the composition of the material on microstructure of high manganese steel; Through Static compressive deformation of cylindrical specimen under different strain rates experimental, the effect of strain rate on the deformation mechanism of different components of high manganese steel was analysised. Cylindrical specimens by static compression at different strain rates, analysis of strain rate on the different components of high manganese steel impact deformation mechanism; The mechanical performance characteristics are analyzed under different strain rate of three components high-manganese steel by stress - strain curves. By Compressive Split-Hopkinson Pressure Bar experiments to study the mechanism of high manganese steel deformation at high strain rates. The study found: the exclusion of the impact of the martensitic transformation can produce 18Mn high manganese TRIP or TWIP effect after deformation. Through observation and calculation, it found C, Al's content of alloying elements on the grain sizes less affected, but the starting temperature of martensitic transformation and layer greatly affects high manganese wrong size possible. Through analysis, found C, Al decides that the high content of alloying elements manganese organization original phase composition and deformation mechanism; organizations γ + ε-M + α'-M high manganese TRIP effect occurs, organizations γ + ε-M's high manganese TRIP effect occurs, tissue TWIP effect of high manganese steel γ.