INFLUENCE OF FLY ASH REPLACEMENT ON STRENGTH PROPERTIES OF CEMENT MORTAR
Amarnath Yerramala
Abstract
Amarnath Yerramala
Abstract
Strength properties of fly ash mortars were evaluated through laboratory investigations. OPC of 53 grade replaced with class F fly ash with 5 - 25 % in the increments of 5 %. The results shown that at early age at all fly ash replacements the strength decreased with respect to normal mortar. However, after 28 days and above the mortars made with fly ash replacement up to 15% resulted higher strength than normal OPC mortar. Fly ash replacement of 20 and 25% always had lower strength than normal mortar. It was found that 10% fly ash is the optimum content for maximum strength.
OpenAlex reports 37 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
Strength properties of fly ash mortars were evaluated through laboratory investigations. OPC of 53 grade replaced with class F fly ash with 5 - 25 % in the increments of 5 %. The results shown that at early age at all fly ash replacements the strength decreased with respect to normal mortar. However, after 28 days and above the mortars made with fly ash replacement up to 15% resulted higher strength than normal OPC mortar. Fly ash replacement of 20 and 25% always had lower strength than normal mortar. It was found that 10% fly ash is the optimum content for maximum strength.
Key concepts: Fly ash, Mortar, Cement, Materials science, Composite material, Compressive strength, Metallurgy