Prediction of total pressure characteristics in the settling chamber of a supersonic blowdown wind tunnel

Abstract Occurrence of transient starting and stopping loads during tests at high Mach numbers is one of the major problems in intermittent blowdown wind tunnels. It is believed that in order to overcome this problem, the wind tunnel could be started at a low Mach number and low stagnation pressure; the desired high Mach number condition could be reached by continuously changing the nozzle contour while synchronously increasing the stagnation pressure. After completing the tests, the nozzle could be brought back to the initial low Mach number accompanied by synchronous decrease in the stagnation pressure. In such a scenario, it is important to ensure that the pressure regulating valve (PRV) of the wind tunnel delivers and maintains a specified minimum stagnation pressure at any Mach number, so that supersonic breakdown of the test section flow does not occur. In this paper, the problem is formulated based on quasi-steady one-dimensional isentropic equations and numerically solved to predict the time histories of settling chamber pressure and storage tank pressure for a given trajectory of the opening of the PRV, as the Mach number is changed from Mach 1 to 4·0 continuously in four seconds and vice versa. The effects of rate of change of PRV open area and rate of change of Mach number on the stagnation pressure characteristics in the settling chamber and storage tank are predicted. The measured trajectories of the PRV in experiments in the NAL 0·6m transonic wind tunnel are used as input to the prediction program to validate the methodology. Predictions indicate that when the nozzle throat is changed from Mach 1 to 4 in four seconds, the settling chamber stagnation pressure rapidly builds up and approaches the pressure in the storage tank. Predictions show an alarming rise in free stream dynamic pressure during transition from Mach 1 to 4 and vice versa, which needs to be verified through measurements.