2013Coal science and technologyRequires access

Study on Pre-Drainage Seam Gas Technology with Borehole Drilled Along Seam in Outburst Mine

Zhaoyang Yu

Open publisher page 2 citations

Abstract

No.111706 coal mining face in No.17 seam of Xin'an Mine was selected as a trial zone of the gas pre-drainage technology with the boreholes drilled along the mining seam.The rational parameter values of the gas pre-drainage technology for No.17 seam were studied.The results showed that with the borehole cross layout method,the gas pre-drainage value could be improved by 40% and the gas pre-drainage value with the 94 mm large diameter boreholes would be 34% higher than the gas pre-drainage value with the 65 mm diameter boreholes.The borehole gas drainage concentration within the borehole drilling site would be one time higher than the borehole gas drainage concentration in the gateway,the borehole sealing depth should not be less than 5 m.The paper proposed that two directional gas drainage boreholes should be drilled to cover the whole coal mining face and the borehole depth in the gateway driving face should be controlled within 100 m.

About this research paper

What this paper is about

No.111706 coal mining face in No.17 seam of Xin'an Mine was selected as a trial zone of the gas pre-drainage technology with the boreholes drilled along the mining seam.The rational parameter values of the gas pre-drainage technology for No.17 seam were studied.The results showed that with the borehole cross layout method,the gas pre-drainage value could be improved by 40% and the gas pre-drainage value with the 94 mm large diameter boreholes would be 34% higher than the gas pre-drainage value with the 65 mm diameter boreholes.The borehole gas drainage concentration within the borehole drilling site would be one time higher than the borehole gas drainage concentration in the gateway,the borehole sealing depth should not be less than 5 m.The paper proposed that two directional gas drainage boreholes should be drilled to cover the whole coal mining face and the borehole depth in the gateway driving face should be controlled within 100 m.

Why it matters

OpenAlex reports 2 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

No.111706 coal mining face in No.17 seam of Xin'an Mine was selected as a trial zone of the gas pre-drainage technology with the boreholes drilled along the mining seam.The rational parameter values of the gas pre-drainage technology for No.17 seam were studied.The results showed that with the borehole cross layout method,the gas pre-drainage value could be improved by 40% and the gas pre-drainage value with the 94 mm large diameter boreholes would be 34% higher than the gas pre-drainage value with the 65 mm diameter boreholes.The borehole gas drainage concentration within the borehole drilling site would be one time higher than the borehole gas drainage concentration in the gateway,the borehole sealing depth should not be less than 5 m.The paper proposed that two directional gas drainage boreholes should be drilled to cover the whole coal mining face and the borehole depth in the gateway driving face should be controlled within 100 m.

Key concepts: Borehole, Drainage, Drilling, Coal mining, Geology, Petroleum engineering, Mining engineering, Coal

Related papers

Back to paper searchBrowse research topicsOriginal source
Study on Pre-Drainage Seam Gas Technology with Borehole Drilled Along Seam in Outburst Mine — Research Paper | ScholarLens