2012•Journal of University of Science and Technology BeijingRequires access

Study on refining slag and inclusions in 82B hard wire steel

Ning Ding

Open publisher page 2 citations

Abstract

The effect of refining slag on inclusions was studied from two aspects,the activity of Al2O3 and the composition of inclusions.The activity of Al2O3 in a CaO-Al2O3-SiO2-MgO(8%)-CaF2(8%) slag was calculated by the thermodynamic software Factsage,and the influence of slag basicity and(MgO) content on the activity of Al2O3 were analyzed.When the slag basicity increases from 1.0 to 2.0,the activity of Al2O3 in the slag decreases rapidly,and when the slag basicity increases from 2.0 to 3.8,the activity of Al2O3 has little change.There is little difference in the activity of Al2O3 between the slags with(MgO) mass fractions of 5% and 8%,and s can be easily reduced into molten steel from the slag with high basicity.Many brittle inclusions containing MgO were found in wire rods with the high basicity refining slag,and by analysis the most appropriate basicity is 2.5 to 3.0.

About this research paper

What this paper is about

The effect of refining slag on inclusions was studied from two aspects,the activity of Al2O3 and the composition of inclusions.The activity of Al2O3 in a CaO-Al2O3-SiO2-MgO(8%)-CaF2(8%) slag was calculated by the thermodynamic software Factsage,and the influence of slag basicity and(MgO) content on the activity of Al2O3 were analyzed.When the slag basicity increases from 1.0 to 2.0,the activity of Al2O3 in the slag decreases rapidly,and when the slag basicity increases from 2.0 to 3.8,the activity of Al2O3 has little change.There is little difference in the activity of Al2O3 between the slags with(MgO) mass fractions of 5% and 8%,and s can be easily reduced into molten steel from the slag with high basicity.Many brittle inclusions containing MgO were found in wire rods with the high basicity refining slag,and by analysis the most appropriate basicity is 2.5 to 3.0.

Why it matters

OpenAlex reports 2 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

The effect of refining slag on inclusions was studied from two aspects,the activity of Al2O3 and the composition of inclusions.The activity of Al2O3 in a CaO-Al2O3-SiO2-MgO(8%)-CaF2(8%) slag was calculated by the thermodynamic software Factsage,and the influence of slag basicity and(MgO) content on the activity of Al2O3 were analyzed.When the slag basicity increases from 1.0 to 2.0,the activity of Al2O3 in the slag decreases rapidly,and when the slag basicity increases from 2.0 to 3.8,the activity of Al2O3 has little change.There is little difference in the activity of Al2O3 between the slags with(MgO) mass fractions of 5% and 8%,and s can be easily reduced into molten steel from the slag with high basicity.Many brittle inclusions containing MgO were found in wire rods with the high basicity refining slag,and by analysis the most appropriate basicity is 2.5 to 3.0.

Key concepts: Refining (metallurgy), Slag (welding), Metallurgy, Materials science

Related papers

Back to paper searchBrowse research topicsOriginal source
Study on refining slag and inclusions in 82B hard wire steel — Research Paper | ScholarLens