2012Journal of Hunan UniversityRequires access

Experimental Study of the Process Control of Reinforcement Corrosion in Concrete

Ou Geng

Open publisher page 0 citations

Abstract

In order to prove the assumption that the corrosion rate of steel in concrete is controlled by the diffusion rate of oxygen,the effect of Icorr on the degree of the pore saturation in concrete at a given temperature was investigated by monitoring corrosion current.A comparison test of the corrosion rates of passive steel,active steel in completely water saturated concrete and active steel in atmosphere environment was conducted.The phase component of corrosion products of steel bars before and after the specimens were immersed into water was measured with the X-ray diffraction analysis technique.The research has indicated that the corrosion rate will decrease when concrete dries(the pores are more open and the pathway for oxygen is higher).After the corrosion starts,FeOOH in corrosion layer can act as depolarizer instead of oxygen,so the corrosion rate is still very high even if concrete is completely water saturated.The oxygen is one of the factors that influence the corrosion rate but is not the factor controlling the corrosion process of steel in concrete.Therefore,all predictions based on the diffusion rate of oxygen through concrete cover must be regarded as not reliable.

About this research paper

What this paper is about

In order to prove the assumption that the corrosion rate of steel in concrete is controlled by the diffusion rate of oxygen,the effect of Icorr on the degree of the pore saturation in concrete at a given temperature was investigated by monitoring corrosion current.A comparison test of the corrosion rates of passive steel,active steel in completely water saturated concrete and active steel in atmosphere environment was conducted.The phase component of corrosion products of steel bars before and after the specimens were immersed into water was measured with the X-ray diffraction analysis technique.The research has indicated that the corrosion rate will decrease when concrete dries(the pores are more open and the pathway for oxygen is higher).After the corrosion starts,FeOOH in corrosion layer can act as depolarizer instead of oxygen,so the corrosion rate is still very high even if concrete is completely water saturated.The oxygen is one of the factors that influence the corrosion rate but is not the factor controlling the corrosion process of steel in concrete.Therefore,all predictions based on the diffusion rate of oxygen through concrete cover must be regarded as not reliable.

Why it matters

A significance statement is not available in the OpenAlex record.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

In order to prove the assumption that the corrosion rate of steel in concrete is controlled by the diffusion rate of oxygen,the effect of Icorr on the degree of the pore saturation in concrete at a given temperature was investigated by monitoring corrosion current.A comparison test of the corrosion rates of passive steel,active steel in completely water saturated concrete and active steel in atmosphere environment was conducted.The phase component of corrosion products of steel bars before and after the specimens were immersed into water was measured with the X-ray diffraction analysis technique.The research has indicated that the corrosion rate will decrease when concrete dries(the pores are more open and the pathway for oxygen is higher).After the corrosion starts,FeOOH in corrosion layer can act as depolarizer instead of oxygen,so the corrosion rate is still very high even if concrete is completely water saturated.The oxygen is one of the factors that influence the corrosion rate but is not the factor controlling the corrosion process of steel in concrete.Therefore,all predictions based on the diffusion rate of oxygen through concrete cover must be regarded as not reliable.

Key concepts: Corrosion, Materials science, Oxygen, Metallurgy, Concrete cover, Diffusion, Composite material, Chemistry

Related papers

Back to paper searchBrowse research topicsOriginal source
Experimental Study of the Process Control of Reinforcement Corrosion in Concrete — Research Paper | ScholarLens