2010•Ranliao huaxue xuebaoRequires access

Effects of additives on wet flue gas desulfurization with ethylenediamine

Wang Xin-rong

Open publisher page 1 citations

Abstract

Experiments were conducted in a small self-designed bubbling apparatus to investigate the effect of acid additives including hydrochloric acid,sulfuric acid,phosphoric acid,citric acid and boric acid on the wet flue gas desulfurization by ethylenediamine.The results show that the acid additives can observably increase the available absorption capacity of the absorbents.The available absorption capacity of ethylenediamine/boric acid(266 mg/L) and ethylenediamine/phosphoric acid(269 mg/L) are higher,and have good pH buffering ability.It is found that the desulfurization efficiency of ethylenediamine sharply decreases with time.After adding acid additives,a higher desulfurization efficiency can be maintained for a long time.The recovery of SO2 in ethylenediamine/boric acid,ethylenediamine/phosphoric acid and ethylenediamine/citric acid was studied.All the mean SO2 removal efficiency of the three absorbents in ten cycles can reach 99%,and the SO2 desorption efficiency follows the order: ethylenediamine/boric acidethylenediamine/phosphoric acidethylenediamine/citric acid.According to the experimental results,boric acid and phosphoric acid seem to be the most promising additives.

About this research paper

What this paper is about

Experiments were conducted in a small self-designed bubbling apparatus to investigate the effect of acid additives including hydrochloric acid,sulfuric acid,phosphoric acid,citric acid and boric acid on the wet flue gas desulfurization by ethylenediamine.The results show that the acid additives can observably increase the available absorption capacity of the absorbents.The available absorption capacity of ethylenediamine/boric acid(266 mg/L) and ethylenediamine/phosphoric acid(269 mg/L) are higher,and have good pH buffering ability.It is found that the desulfurization efficiency of ethylenediamine sharply decreases with time.After adding acid additives,a higher desulfurization efficiency can be maintained for a long time.The recovery of SO2 in ethylenediamine/boric acid,ethylenediamine/phosphoric acid and ethylenediamine/citric acid was studied.All the mean SO2 removal efficiency of the three absorbents in ten cycles can reach 99%,and the SO2 desorption efficiency follows the order: ethylenediamine/boric acidethylenediamine/phosphoric acidethylenediamine/citric acid.According to the experimental results,boric acid and phosphoric acid seem to be the most promising additives.

Why it matters

OpenAlex reports 1 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Experiments were conducted in a small self-designed bubbling apparatus to investigate the effect of acid additives including hydrochloric acid,sulfuric acid,phosphoric acid,citric acid and boric acid on the wet flue gas desulfurization by ethylenediamine.The results show that the acid additives can observably increase the available absorption capacity of the absorbents.The available absorption capacity of ethylenediamine/boric acid(266 mg/L) and ethylenediamine/phosphoric acid(269 mg/L) are higher,and have good pH buffering ability.It is found that the desulfurization efficiency of ethylenediamine sharply decreases with time.After adding acid additives,a higher desulfurization efficiency can be maintained for a long time.The recovery of SO2 in ethylenediamine/boric acid,ethylenediamine/phosphoric acid and ethylenediamine/citric acid was studied.All the mean SO2 removal efficiency of the three absorbents in ten cycles can reach 99%,and the SO2 desorption efficiency follows the order: ethylenediamine/boric acidethylenediamine/phosphoric acidethylenediamine/citric acid.According to the experimental results,boric acid and phosphoric acid seem to be the most promising additives.

Key concepts: Ethylenediamine, Chemistry, Boric acid, Phosphoric acid, Citric acid, Flue-gas desulfurization, Inorganic chemistry, Nuclear chemistry

Related papers

Back to paper searchBrowse research topicsOriginal source
Effects of additives on wet flue gas desulfurization with ethylenediamine — Research Paper | ScholarLens