ScholarLens Back to search
2008•Electroplating & FinishingRequires access

Process of electroless Ni-P-SiC-MoS_2 composite plating

Hui Zhang

Open publisher page 0 citations

Abstract

The process of electroless Ni-P-SiC-MoS2 composite plating was studied and the bath composition and test scheme were presented. The effects of temperature and concentration of surfactant on the electroless plating rate, adhesion and micro-hardness of the composite coating were discussed. The test results show that a fastest plating rate and good adhesion can be obtained at a temperature of 90 °C and a surfactant concentration of 60 mg/L, and the micro-hardness of the composite coating reaches 684 HV.

About this research paper

What this paper is about

The process of electroless Ni-P-SiC-MoS2 composite plating was studied and the bath composition and test scheme were presented. The effects of temperature and concentration of surfactant on the electroless plating rate, adhesion and micro-hardness of the composite coating were discussed. The test results show that a fastest plating rate and good adhesion can be obtained at a temperature of 90 °C and a surfactant concentration of 60 mg/L, and the micro-hardness of the composite coating reaches 684 HV.

Why it matters

A significance statement is not available in the OpenAlex record.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

The process of electroless Ni-P-SiC-MoS2 composite plating was studied and the bath composition and test scheme were presented. The effects of temperature and concentration of surfactant on the electroless plating rate, adhesion and micro-hardness of the composite coating were discussed. The test results show that a fastest plating rate and good adhesion can be obtained at a temperature of 90 °C and a surfactant concentration of 60 mg/L, and the micro-hardness of the composite coating reaches 684 HV.

Key concepts: Composite number, Materials science, Plating (geology), Pulmonary surfactant, Electroless plating, Coating, Adhesion, Composite material

Related papers

Related paper 1Related paper 2Related paper 3
Back to paper searchBrowse research topicsOriginal source
Process of electroless Ni-P-SiC-MoS_2 composite plating — Research Paper | ScholarLens