ScholarLens Back to search
2010•Ironmaking & Steelmaking Processes Products and ApplicationsRequires access

Study on the Production Process of 780MPa Grade Steel Plates With Low Yield Ratio for High-Rise Buildings

Xiaoguang Zhou

Open publisher page 0 citations

Abstract

Steel plate for buildings with high strength and low yield ratio was studied in laboratory.The microstructure of test steel was controlled by proper composition design,controlled rolling and UFC technology in order to increase strength and decrease yield ratio.It has been shown that the composite microstructure of soft phase(bainite ferrite) and hard phase(M/A) can be obtained when UFC final cooling temperature was about 690 ℃,and the percentage of M/A component is about 9.2%.The yield strength and tensile strength could meet the requirements of 780 MPa grade,and the yield ratio was about 0.7.

About this research paper

What this paper is about

Steel plate for buildings with high strength and low yield ratio was studied in laboratory.The microstructure of test steel was controlled by proper composition design,controlled rolling and UFC technology in order to increase strength and decrease yield ratio.It has been shown that the composite microstructure of soft phase(bainite ferrite) and hard phase(M/A) can be obtained when UFC final cooling temperature was about 690 ℃,and the percentage of M/A component is about 9.2%.The yield strength and tensile strength could meet the requirements of 780 MPa grade,and the yield ratio was about 0.7.

Why it matters

A significance statement is not available in the OpenAlex record.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Steel plate for buildings with high strength and low yield ratio was studied in laboratory.The microstructure of test steel was controlled by proper composition design,controlled rolling and UFC technology in order to increase strength and decrease yield ratio.It has been shown that the composite microstructure of soft phase(bainite ferrite) and hard phase(M/A) can be obtained when UFC final cooling temperature was about 690 ℃,and the percentage of M/A component is about 9.2%.The yield strength and tensile strength could meet the requirements of 780 MPa grade,and the yield ratio was about 0.7.

Key concepts: Microstructure, Bainite, Materials science, Ferrite (magnet), Yield (engineering), Ultimate tensile strength, Metallurgy, Composite number

Related papers

Related paper 1Related paper 2Related paper 3
Back to paper searchBrowse research topicsOriginal source
Study on the Production Process of 780MPa Grade Steel Plates With Low Yield Ratio for High-Rise Buildings — Research Paper | ScholarLens