GFAAS Determination of Chromium and Its Compounds in Air Over Working-place
Peng Wei-fang
Abstract
Peng Wei-fang
Abstract
Air sample over working-place was collected by using microporous filtering film with a flow-rate of 5 L·min-1 for 15 min,and the content of chromium in sample was determined by GFAAS.Temperatures selected for ashing and atomization were 1300 ℃ and 2 400 ℃ respectively.Linear relationship between values of absorbance and mass concentration of Cr was obtained in the range within 5 mg·L-1,with detection limit(3s/k) of 6.81×10-4mg·m-3.The proposed method was used in the analysis of air sample,values of recovery found by standard addition method were in the range of 98.8%-100.7%,and values of RSD′s(n=6) found were in the range of 2.2%-2.4%.
A significance statement is not available in the OpenAlex record.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
Air sample over working-place was collected by using microporous filtering film with a flow-rate of 5 L·min-1 for 15 min,and the content of chromium in sample was determined by GFAAS.Temperatures selected for ashing and atomization were 1300 ℃ and 2 400 ℃ respectively.Linear relationship between values of absorbance and mass concentration of Cr was obtained in the range within 5 mg·L-1,with detection limit(3s/k) of 6.81×10-4mg·m-3.The proposed method was used in the analysis of air sample,values of recovery found by standard addition method were in the range of 98.8%-100.7%,and values of RSD′s(n=6) found were in the range of 2.2%-2.4%.
Key concepts: Chromium, Analytical Chemistry (journal), Ashing, Detection limit, Absorbance, Microporous material, Chemistry, Standard addition