Investigation of two-dimensional supersonic twin inlet with slot-coupled cavity in 90° configuration at venter
Le Xie
Abstract
Le Xie
Abstract
A two-dimensional mixed-compression inlet model with slot-coupled cavity in 90° configuration at venter was investigated by wind tunnel at Mach number from 2.0 to 3.5.The range of the investigation covers angle of attack from-4° to 10° and angle of yaw from 0 to 4°.The performances,including critical pressure,total pressure recovery coefficient and mass flow ratio,were acquired.The results indicate that:with increase of the free stream Mach number or the angle of attack at Ma=3.0,the mass flow ratio increases firstly and then declines a little due to the increase of the total pressure loss around the body nose;and the maximum is obtained at design point.The flow field of two inlets is different at yaw,and the work range is determined by the windward inlet.Besides,the distribution of static-pressure coefficient along the duct validates that a terminal shock can stay around the cavity,so inlets with the slot-coupled cavity can work under wider back pressure.
OpenAlex reports 3 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
A two-dimensional mixed-compression inlet model with slot-coupled cavity in 90° configuration at venter was investigated by wind tunnel at Mach number from 2.0 to 3.5.The range of the investigation covers angle of attack from-4° to 10° and angle of yaw from 0 to 4°.The performances,including critical pressure,total pressure recovery coefficient and mass flow ratio,were acquired.The results indicate that:with increase of the free stream Mach number or the angle of attack at Ma=3.0,the mass flow ratio increases firstly and then declines a little due to the increase of the total pressure loss around the body nose;and the maximum is obtained at design point.The flow field of two inlets is different at yaw,and the work range is determined by the windward inlet.Besides,the distribution of static-pressure coefficient along the duct validates that a terminal shock can stay around the cavity,so inlets with the slot-coupled cavity can work under wider back pressure.
Key concepts: Inlet, Mach number, Supersonic speed, Mechanics, Supersonic wind tunnel, Static pressure, Wind tunnel, Angle of attack