2003American MineralogistRequires access

Fluid-induced nucleation of (Y+REE)-phosphate minerals within apatite: Nature and experiment. Part II. Fluorapatite

Daniel E. Harlov, Hans‐Jürgen Förster

Open publisher page 317 citations

Abstract

To elucidate at what pressure and temperature and for what fluid compositions monazite may be induced to form from fluorapatite, the LREE-enriched Durango fluorapatite has been metasomatized experimentally at temperatures of 300, 600, 700, 800, 850, and 900°C and pressures of 500 and 1000 MPa. Fluids used included pure H 2 O, various NaCl, KCl, and CaCl 2 brines (salt/H 2 O = 50/50, 30/70, or 10/90), and either 90/10 CO 2 /H 2 O or 40/60 CO 2 /H 2 O mix. Monazite formed in the fluorapatite + H 2 O, fluorapatite + 40/60 CO2/H 2 O, and the fluorapatite + KCl brine experiments. At 900°C and 1000 MPa, monazite formed both as inclusions within the fluorapatite and externally on its surface. Below 900°C, monazite grew only externally on the fluorapatite, either as euhedral to semi-euhedral crystals or as partial mantles over smaller fluorapatite grains. Monazite, especially at 900°C and 1000 MPa, is compositionally heterogeneous, specifically with respect to the Th content (ThO 2 = 4-38 wt%). Whereas the reactant fluorapatite in the pure H2O experiments remained unzoned at lower temperatures, three coupled zones with different (LREE+Si+Na) abundances developed at 900°C. These zones roughly follow the rim of the fluorapatite enclosing a fourth zone or the core, resembling the original composition. Monazite inclusions formed only in the one zone where the LREE are depleted. In the NaCl brine experiments, the Na replaced Si lost to the solution, which stabilized the LREE, and precluded formation of monazite. Similarly, the high activity of Ca in the CaCl 2 brine caused Ca to replace (LREE+Na) on the Ca site and discouraged the growth of monazite. The fluorapatite recrystallized to a fluor-chlorapatite, which displays oscillatory zoning, specifically with respect to the LREE. The results from this study imply that the presence of monazite inclusions and rim grains associated with fluorapatite (1) can be metasomatically induced; (2) can give insights into the chemistry of the metasomatizing fluids; (3) can provide some information on the grade of the metasomatic overprint; and (4) could indicate the occurrence of one or more metasomatic events

About this research paper

What this paper is about

To elucidate at what pressure and temperature and for what fluid compositions monazite may be induced to form from fluorapatite, the LREE-enriched Durango fluorapatite has been metasomatized experimentally at temperatures of 300, 600, 700, 800, 850, and 900°C and pressures of 500 and 1000 MPa. Fluids used included pure H 2 O, various NaCl, KCl, and CaCl 2 brines (salt/H 2 O = 50/50, 30/70, or 10/90), and either 90/10 CO 2 /H 2 O or 40/60 CO 2 /H 2 O mix. Monazite formed in the fluorapatite + H 2 O, fluorapatite + 40/60 CO2/H 2 O, and the fluorapatite + KCl brine experiments. At 900°C and 1000 MPa, monazite formed both as inclusions within the fluorapatite and externally on its surface. Below 900°C, monazite grew only externally on the fluorapatite, either as euhedral to semi-euhedral crystals or as partial mantles over smaller fluorapatite grains. Monazite, especially at 900°C and 1000 MPa, is compositionally heterogeneous, specifically with respect to the Th content (ThO 2 = 4-38 wt%). Whereas the reactant fluorapatite in the pure H2O experiments remained unzoned at lower temperatures, three coupled zones with different (LREE+Si+Na) abundances developed at 900°C. These zones roughly follow the rim of the fluorapatite enclosing a fourth zone or the core, resembling the original composition. Monazite inclusions formed only in the one zone where the LREE are depleted. In the NaCl brine experiments, the Na replaced Si lost to the solution, which stabilized the LREE, and precluded formation of monazite. Similarly, the high activity of Ca in the CaCl 2 brine caused Ca to replace (LREE+Na) on the Ca site and discouraged the growth of monazite. The fluorapatite recrystallized to a fluor-chlorapatite, which displays oscillatory zoning, specifically with respect to the LREE. The results from this study imply that the presence of monazite inclusions and rim grains associated with fluorapatite (1) can be metasomatically induced; (2) can give insights into the chemistry of the metasomatizing fluids; (3) can provide some information on the grade of the metasomatic overprint; and (4) could indicate the occurrence of one or more metasomatic events

Why it matters

OpenAlex reports 317 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

To elucidate at what pressure and temperature and for what fluid compositions monazite may be induced to form from fluorapatite, the LREE-enriched Durango fluorapatite has been metasomatized experimentally at temperatures of 300, 600, 700, 800, 850, and 900°C and pressures of 500 and 1000 MPa. Fluids used included pure H 2 O, various NaCl, KCl, and CaCl 2 brines (salt/H 2 O = 50/50, 30/70, or 10/90), and either 90/10 CO 2 /H 2 O or 40/60 CO 2 /H 2 O mix. Monazite formed in the fluorapatite + H 2 O, fluorapatite + 40/60 CO2/H 2 O, and the fluorapatite + KCl brine experiments. At 900°C and 1000 MPa, monazite formed both as inclusions within the fluorapatite and externally on its surface. Below 900°C, monazite grew only externally on the fluorapatite, either as euhedral to semi-euhedral crystals or as partial mantles over smaller fluorapatite grains. Monazite, especially at 900°C and 1000 MPa, is compositionally heterogeneous, specifically with respect to the Th content (ThO 2 = 4-38 wt%). Whereas the reactant fluorapatite in the pure H2O experiments remained unzoned at lower temperatures, three coupled zones with different (LREE+Si+Na) abundances developed at 900°C. These zones roughly follow the rim of the fluorapatite enclosing a fourth zone or the core, resembling the original composition. Monazite inclusions formed only in the one zone where the LREE are depleted. In the NaCl brine experiments, the Na replaced Si lost to the solution, which stabilized the LREE, and precluded formation of monazite. Similarly, the high activity of Ca in the CaCl 2 brine caused Ca to replace (LREE+Na) on the Ca site and discouraged the growth of monazite. The fluorapatite recrystallized to a fluor-chlorapatite, which displays oscillatory zoning, specifically with respect to the LREE. The results from this study imply that the presence of monazite inclusions and rim grains associated with fluorapatite (1) can be metasomatically induced; (2) can give insights into the chemistry of the metasomatizing fluids; (3) can provide some information on the grade of the metasomatic overprint; and (4) could indicate the occurrence of one or more metasomatic events

Key concepts: Fluorapatite, Monazite, Apatite, Geology, Mineralogy, Brine, Geochemistry, Phosphate minerals

Related papers

Back to paper searchBrowse research topicsOriginal source
Fluid-induced nucleation of (Y+REE)-phosphate minerals within apatite: Nature and experiment. Part II. Fluorapatite — Research Paper | ScholarLens