Analysis on influence of gathering and transportation technology on the effect of pour point depressant in high wax crude oil
Wang Lei
Abstract
Wang Lei
Abstract
The gathering and transportation technology of high-wax crude oil has a great influence on reducing the viscosity and pour point of oil.Jilin Munan crude oil is depressed by pour point depressant AE,and the influences of the dosage of pour point depressant,adding temperature,high-speed shearing of pump,repeated heating and cooling rate in gathering and transportation process on the effect of pour point depressant are researched.Experimental results show that the optimal conditions are as follows: additive dosage of pour point depressant is 0.7%,adding temperature is 70 ℃,the temperature of high-speed shearing is at least 10 ℃ higher than wax precipitation point,the repeated heating temperature should not be lower than 60 ℃,the cooling process should be slow down in the 55~40 ℃wax crystallization peak area.
A significance statement is not available in the OpenAlex record.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
The gathering and transportation technology of high-wax crude oil has a great influence on reducing the viscosity and pour point of oil.Jilin Munan crude oil is depressed by pour point depressant AE,and the influences of the dosage of pour point depressant,adding temperature,high-speed shearing of pump,repeated heating and cooling rate in gathering and transportation process on the effect of pour point depressant are researched.Experimental results show that the optimal conditions are as follows: additive dosage of pour point depressant is 0.7%,adding temperature is 70 ℃,the temperature of high-speed shearing is at least 10 ℃ higher than wax precipitation point,the repeated heating temperature should not be lower than 60 ℃,the cooling process should be slow down in the 55~40 ℃wax crystallization peak area.
Key concepts: Depressant, Pour point, Wax, Chemistry, Crude oil, Freezing point, Pulp and paper industry, Petroleum engineering