Numerical simulation of hydrodynamic characteristics in a gas–solid fluidized bed
Lijun Wang, Xin Xie, Guangchao Wei, Rundong Li
Abstract
Lijun Wang, Xin Xie, Guangchao Wei, Rundong Li
Abstract
The fluidization of quartz particles as bed materials in the fluidized bed has significant influences on the combustion and gasification of refused derived fuels. Three-dimensional (3-D) simulations and analyses are performed for Geldart B particles using the computational fluid dynamics (CFD) method based on the kinetic theory of granular flows (KTGF) to investigate the hydrodynamic behavior. The drag models of Syamlal–O’Brien, Gidaspow, and Wen and Yu are selected to analyze the applicability of the kinetic model. The pressure drop, velocity distribution and solid volume fraction are studied numerically when the gas inlet velocity is changed. The results show that the increase of superficial gas velocity would lead to heterogeneous expansion of solid volume fraction and velocity distributions in both the dense phase zone and free board with a similar distribution pattern. The near wall particles form a dense phase structure with the solid volume fraction being greater than 0.3.
OpenAlex reports 7 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
The fluidization of quartz particles as bed materials in the fluidized bed has significant influences on the combustion and gasification of refused derived fuels. Three-dimensional (3-D) simulations and analyses are performed for Geldart B particles using the computational fluid dynamics (CFD) method based on the kinetic theory of granular flows (KTGF) to investigate the hydrodynamic behavior. The drag models of Syamlal–O’Brien, Gidaspow, and Wen and Yu are selected to analyze the applicability of the kinetic model. The pressure drop, velocity distribution and solid volume fraction are studied numerically when the gas inlet velocity is changed. The results show that the increase of superficial gas velocity would lead to heterogeneous expansion of solid volume fraction and velocity distributions in both the dense phase zone and free board with a similar distribution pattern. The near wall particles form a dense phase structure with the solid volume fraction being greater than 0.3.
Key concepts: Fluidization, Fluidized bed, Drag, Volume fraction, Mechanics, Pressure drop, Computational fluid dynamics, Materials science