Amidoxime-Grafted Hydrothermal Carbon Microspheres for Highly Selective Separation of Uranium
Junxia Geng, Lijian Ma, Hang Wang, Jun Liu, Chiyao Bai, Qiang Song, Juan Li, Min Hou, Shoujian Li
Abstract
Junxia Geng, Lijian Ma, Hang Wang, Jun Liu, Chiyao Bai, Qiang Song, Juan Li, Min Hou, Shoujian Li
Abstract
A new amidoxime-functionalized carbonaceous sorbent has been successfully prepared using hydrothermal carbon microsphere as solid matrix and diaminomaleonitrile as precursor of amidoxime ligand. Effects of pH, sorbent dosage, contact time, temperature, initial U(VI) concentration and ionic strength on U(VI) sorption were investigated in detail through batch experiments. Sorption of U(VI) on the sorbent was pH-dependent. Sorption equilibrium was reached in 5 min. Distinctively, higher temperature was beneficial to the sorption of U(VI) in the range of 15-60 degrees C, high ionic strength up to 1 mol L(-1) NaNO3 had almost no effect on the sorption, and the maximum U(VI) sorption capacity of 466 mg g(-1) was observed under the conditions tested. The as-synthesized sorbent exhibited a high selectivity for U(VI) over other 12 competing ions coexisting in a simulated nuclear industrial effluent sample and the U(VI) sorption amount reached up to 1.09 mmol g(-1), accounting for about 52% of the total sorption amount.
OpenAlex reports 25 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
A new amidoxime-functionalized carbonaceous sorbent has been successfully prepared using hydrothermal carbon microsphere as solid matrix and diaminomaleonitrile as precursor of amidoxime ligand. Effects of pH, sorbent dosage, contact time, temperature, initial U(VI) concentration and ionic strength on U(VI) sorption were investigated in detail through batch experiments. Sorption of U(VI) on the sorbent was pH-dependent. Sorption equilibrium was reached in 5 min. Distinctively, higher temperature was beneficial to the sorption of U(VI) in the range of 15-60 degrees C, high ionic strength up to 1 mol L(-1) NaNO3 had almost no effect on the sorption, and the maximum U(VI) sorption capacity of 466 mg g(-1) was observed under the conditions tested. The as-synthesized sorbent exhibited a high selectivity for U(VI) over other 12 competing ions coexisting in a simulated nuclear industrial effluent sample and the U(VI) sorption amount reached up to 1.09 mmol g(-1), accounting for about 52% of the total sorption amount.
Key concepts: Sorbent, Sorption, Ionic strength, Materials science, Hydrothermal circulation, Selectivity, Nuclear chemistry, Carbon fibers