20152015 Asia-Pacific Microwave Conference (APMC)Requires access

A third-harmonic mixer using balanced diode configuration at W-band frequencies

Shu Jiang, Juan Wei, Jinping Xu, Jiangling Dou

Open publisher page 4 citations

Abstract

This paper reports on the design, fabrication and performance of a third-harmonic fixed-tuned frequency mixer, working at W-band frequencies. The mixing circuit consists of a variation of crossbar structure, a combination of the suspended stripline circuit and the microstrip matching circuit. The mixing diodes are arranged as a single balanced configuration near the end of the RF waveguide. The precise RF grounding is provided by the grounding via holes close to the diodes. For a fixed IF frequency of 2.0GHz, the mixer has a measured conversion loss (CL) of 12.5 ±1.5 dB over both the frequency range of 80-83GHz and 91-97GHz. Furthermore, the mixer exhibits wide-band CL characteristics of better than 18.0dB over 75-83GHz and 88-98GHz. The achieved LO-to-IF isolation is better than 30dB. This mixer design offers an effective and low-cost alternative solution for W-band receivers.

About this research paper

What this paper is about

This paper reports on the design, fabrication and performance of a third-harmonic fixed-tuned frequency mixer, working at W-band frequencies. The mixing circuit consists of a variation of crossbar structure, a combination of the suspended stripline circuit and the microstrip matching circuit. The mixing diodes are arranged as a single balanced configuration near the end of the RF waveguide. The precise RF grounding is provided by the grounding via holes close to the diodes. For a fixed IF frequency of 2.0GHz, the mixer has a measured conversion loss (CL) of 12.5 ±1.5 dB over both the frequency range of 80-83GHz and 91-97GHz. Furthermore, the mixer exhibits wide-band CL characteristics of better than 18.0dB over 75-83GHz and 88-98GHz. The achieved LO-to-IF isolation is better than 30dB. This mixer design offers an effective and low-cost alternative solution for W-band receivers.

Why it matters

OpenAlex reports 4 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

This paper reports on the design, fabrication and performance of a third-harmonic fixed-tuned frequency mixer, working at W-band frequencies. The mixing circuit consists of a variation of crossbar structure, a combination of the suspended stripline circuit and the microstrip matching circuit. The mixing diodes are arranged as a single balanced configuration near the end of the RF waveguide. The precise RF grounding is provided by the grounding via holes close to the diodes. For a fixed IF frequency of 2.0GHz, the mixer has a measured conversion loss (CL) of 12.5 ±1.5 dB over both the frequency range of 80-83GHz and 91-97GHz. Furthermore, the mixer exhibits wide-band CL characteristics of better than 18.0dB over 75-83GHz and 88-98GHz. The achieved LO-to-IF isolation is better than 30dB. This mixer design offers an effective and low-cost alternative solution for W-band receivers.

Key concepts: Harmonic mixer, Electronic mixer, Stripline, Microstrip, Diode, Frequency mixer, Harmonic, Intermediate frequency

Related papers

Back to paper searchBrowse research topicsOriginal source
A third-harmonic mixer using balanced diode configuration at W-band frequencies — Research Paper | ScholarLens