1967Unpublished venueRequires access

Devonian of the Southwestern United States

Forrest G. Poole, D. L. Baars, Harald Drewes, Philip Thayer Hayes, Keith B. Ketner, Edwin D. McKee, Curt Teichert, John Williams

Open publisher page 30 citations

Abstract

Abstract The structural framework that controlled Devonian deposition consisted of, from west to east: (1) a eugeosynclinal area in northern California and western Nevada; (2) a miogeosynclinal area in southeastern California, eastern Nevada, and western Utah; and (3) a cratonic area in Arizona, eastern Utah, Colorado, New Mexico, and western Texas, east of a northeast-trending hinge line (Wasatch line). The eugeosyncline contains a fragmentary record of Middle Devonian rocks at least 4,000 feet thick characterized by thin-bedded chert, siliceous mudstone, and some limestone and volcanic rocks. The original thickness, however, probably exceeded 6,000 feet and probably included Lower and Upper Devonian rocks. The miogeosyncline contains Lower, Middle, and Upper Devonian rocks as much as 6,000 feet thick characterized by thick units of dolomite and limestone and some local interbeds of sandstone. A transitional zone perhaps 50 miles wide separates the eugeosynclinal and miogeosynclinal facies. The craton contains mostly Upper Devonian rocks, generally less than 1,000 feet thick, characterized by dolomite and limestone and local interbeds of sandstone and mudstone. Widespread crustal movements occurred during Late Devonian time. The Antler orogeny in Nevada initiated a culm facies in the geosyncline. Eugeosynclinal and transitional rocks including those of Devonian age were uplifted to form the Antler orogenic belt, and then were thrust eastward over autochthonous miogeosynclinal rocks in latest Devonian or earliest Mississippian time. Folding and faulting, and subsequent erosion on local uplifts, produced clastic deposits of Late Devonian age in Utah and southwestern Colorado. Devonian rocks in many parts of the geosynclinal area have been moved since Devonian time by large-scale, generally eastward thrusting, oroflexural bending and strike-slip faulting. Four major subdivisions of the Devonian System and related rocks are treated separately: 1) Lower Devonian (Gedinnian, Siegenian, Emsian) and related Upper Silurian (Ludlovian) rocks. 2) Middle Devonian (Eifelian and Givetian) rocks. 3) Lower Upper Devonian (Frasnian, to I) rocks. 4) Upper Upper Devonian (Famennian, to II-VI) and related lowermost Mississippian (Tournaisian, cu I) rocks.

About this research paper

What this paper is about

Abstract The structural framework that controlled Devonian deposition consisted of, from west to east: (1) a eugeosynclinal area in northern California and western Nevada; (2) a miogeosynclinal area in southeastern California, eastern Nevada, and western Utah; and (3) a cratonic area in Arizona, eastern Utah, Colorado, New Mexico, and western Texas, east of a northeast-trending hinge line (Wasatch line). The eugeosyncline contains a fragmentary record of Middle Devonian rocks at least 4,000 feet thick characterized by thin-bedded chert, siliceous mudstone, and some limestone and volcanic rocks. The original thickness, however, probably exceeded 6,000 feet and probably included Lower and Upper Devonian rocks. The miogeosyncline contains Lower, Middle, and Upper Devonian rocks as much as 6,000 feet thick characterized by thick units of dolomite and limestone and some local interbeds of sandstone. A transitional zone perhaps 50 miles wide separates the eugeosynclinal and miogeosynclinal facies. The craton contains mostly Upper Devonian rocks, generally less than 1,000 feet thick, characterized by dolomite and limestone and local interbeds of sandstone and mudstone. Widespread crustal movements occurred during Late Devonian time. The Antler orogeny in Nevada initiated a culm facies in the geosyncline. Eugeosynclinal and transitional rocks including those of Devonian age were uplifted to form the Antler orogenic belt, and then were thrust eastward over autochthonous miogeosynclinal rocks in latest Devonian or earliest Mississippian time. Folding and faulting, and subsequent erosion on local uplifts, produced clastic deposits of Late Devonian age in Utah and southwestern Colorado. Devonian rocks in many parts of the geosynclinal area have been moved since Devonian time by large-scale, generally eastward thrusting, oroflexural bending and strike-slip faulting. Four major subdivisions of the Devonian System and related rocks are treated separately: 1) Lower Devonian (Gedinnian, Siegenian, Emsian) and related Upper Silurian (Ludlovian) rocks. 2) Middle Devonian (Eifelian and Givetian) rocks. 3) Lower Upper Devonian (Frasnian, to I) rocks. 4) Upper Upper Devonian (Famennian, to II-VI) and related lowermost Mississippian (Tournaisian, cu I) rocks.

Why it matters

OpenAlex reports 30 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Abstract The structural framework that controlled Devonian deposition consisted of, from west to east: (1) a eugeosynclinal area in northern California and western Nevada; (2) a miogeosynclinal area in southeastern California, eastern Nevada, and western Utah; and (3) a cratonic area in Arizona, eastern Utah, Colorado, New Mexico, and western Texas, east of a northeast-trending hinge line (Wasatch line). The eugeosyncline contains a fragmentary record of Middle Devonian rocks at least 4,000 feet thick characterized by thin-bedded chert, siliceous mudstone, and some limestone and volcanic rocks. The original thickness, however, probably exceeded 6,000 feet and probably included Lower and Upper Devonian rocks. The miogeosyncline contains Lower, Middle, and Upper Devonian rocks as much as 6,000 feet thick characterized by thick units of dolomite and limestone and some local interbeds of sandstone. A transitional zone perhaps 50 miles wide separates the eugeosynclinal and miogeosynclinal facies. The craton contains mostly Upper Devonian rocks, generally less than 1,000 feet thick, characterized by dolomite and limestone and local interbeds of sandstone and mudstone. Widespread crustal movements occurred during Late Devonian time. The Antler orogeny in Nevada initiated a culm facies in the geosyncline. Eugeosynclinal and transitional rocks including those of Devonian age were uplifted to form the Antler orogenic belt, and then were thrust eastward over autochthonous miogeosynclinal rocks in latest Devonian or earliest Mississippian time. Folding and faulting, and subsequent erosion on local uplifts, produced clastic deposits of Late Devonian age in Utah and southwestern Colorado. Devonian rocks in many parts of the geosynclinal area have been moved since Devonian time by large-scale, generally eastward thrusting, oroflexural bending and strike-slip faulting. Four major subdivisions of the Devonian System and related rocks are treated separately: 1) Lower Devonian (Gedinnian, Siegenian, Emsian) and related Upper Silurian (Ludlovian) rocks. 2) Middle Devonian (Eifelian and Givetian) rocks. 3) Lower Upper Devonian (Frasnian, to I) rocks. 4) Upper Upper Devonian (Famennian, to II-VI) and related lowermost Mississippian (Tournaisian, cu I) rocks.

Key concepts: Geology, Devonian, Geosyncline, Late Devonian extinction, Paleontology, Facies, Geochemistry, Dolomite

Related papers

Back to paper searchBrowse research topicsOriginal source
Devonian of the Southwestern United States — Research Paper | ScholarLens