2005PubMedRequires access

An assessment of crown-to-root ratios with short sintered porous-surfaced implants supporting prostheses in partially edentulous patients.

Shahin Rokni, Reynaldo Todescan, Philip Watson, Michael J. Pharoah, Albert O. Adegbembo, Douglas Deporter

Open publisher page 126 citations

Abstract

PURPOSE: Implant length, implant surface area, and crown-to-root (c/r) ratio and their relationship to crestal bone levels were analyzed in 2 groups of partially edentulous patients treated with sintered porous-surfaced dental implants. MATERIALS AND METHODS: One hundred ninety-nine implants were used to restore 74 partially edentulous patients with fixed prostheses. Implants were categorized according to their length ("short" versus "long") and estimated surface area ("small" versus "large"). "Short" implants had lengths of 5 or 7 mm, while "long" implants were either 9 or 12 mm in length. "Small" implants had estimated surface areas of < or = 600 mm2, while "large" implants had estimated surface areas > 600 mm2. Other data collected included c/r ratio (measured on articulated diagnostic casts), whether or not the implants were splinted, and standardized sequential radiographs. RESULTS: The mean c/r ratio was 1.5 (SD = 0.4; range 0.8 to 3.0), with 78.9% of the implants having a c/r ratio between 1.1 and 2.0. Neither c/r ratio nor estimated implant surface area (small or large) affected steady-state crestal bone levels. However, implant length and whether the implants were splinted did appear to affect bone levels. Long implants had greater crestal bone loss (0.2 mm more) than short implants; splinted implants showed greater crestal bone loss (0.2 mm more) than nonsplinted ones. These differences were statistically significant. DISCUSSION AND CONCLUSIONS: Sintered porous-surfaced implants performed well in short lengths (7 mm or less) in this series of partially edentulous patients. The data suggested that long implants and/or splinting can result in greater crestal bone loss; longer implants and splinted implants appeared to favor greater crestal bone loss in this investigation. These conclusions are, of course, specific to the implants used and would not be relevant to other implant types.

About this research paper

What this paper is about

PURPOSE: Implant length, implant surface area, and crown-to-root (c/r) ratio and their relationship to crestal bone levels were analyzed in 2 groups of partially edentulous patients treated with sintered porous-surfaced dental implants. MATERIALS AND METHODS: One hundred ninety-nine implants were used to restore 74 partially edentulous patients with fixed prostheses. Implants were categorized according to their length ("short" versus "long") and estimated surface area ("small" versus "large"). "Short" implants had lengths of 5 or 7 mm, while "long" implants were either 9 or 12 mm in length. "Small" implants had estimated surface areas of < or = 600 mm2, while "large" implants had estimated surface areas > 600 mm2. Other data collected included c/r ratio (measured on articulated diagnostic casts), whether or not the implants were splinted, and standardized sequential radiographs. RESULTS: The mean c/r ratio was 1.5 (SD = 0.4; range 0.8 to 3.0), with 78.9% of the implants having a c/r ratio between 1.1 and 2.0. Neither c/r ratio nor estimated implant surface area (small or large) affected steady-state crestal bone levels. However, implant length and whether the implants were splinted did appear to affect bone levels. Long implants had greater crestal bone loss (0.2 mm more) than short implants; splinted implants showed greater crestal bone loss (0.2 mm more) than nonsplinted ones. These differences were statistically significant. DISCUSSION AND CONCLUSIONS: Sintered porous-surfaced implants performed well in short lengths (7 mm or less) in this series of partially edentulous patients. The data suggested that long implants and/or splinting can result in greater crestal bone loss; longer implants and splinted implants appeared to favor greater crestal bone loss in this investigation. These conclusions are, of course, specific to the implants used and would not be relevant to other implant types.

Why it matters

OpenAlex reports 126 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

PURPOSE: Implant length, implant surface area, and crown-to-root (c/r) ratio and their relationship to crestal bone levels were analyzed in 2 groups of partially edentulous patients treated with sintered porous-surfaced dental implants. MATERIALS AND METHODS: One hundred ninety-nine implants were used to restore 74 partially edentulous patients with fixed prostheses. Implants were categorized according to their length ("short" versus "long") and estimated surface area ("small" versus "large"). "Short" implants had lengths of 5 or 7 mm, while "long" implants were either 9 or 12 mm in length. "Small" implants had estimated surface areas of < or = 600 mm2, while "large" implants had estimated surface areas > 600 mm2. Other data collected included c/r ratio (measured on articulated diagnostic casts), whether or not the implants were splinted, and standardized sequential radiographs. RESULTS: The mean c/r ratio was 1.5 (SD = 0.4; range 0.8 to 3.0), with 78.9% of the implants having a c/r ratio between 1.1 and 2.0. Neither c/r ratio nor estimated implant surface area (small or large) affected steady-state crestal bone levels. However, implant length and whether the implants were splinted did appear to affect bone levels. Long implants had greater crestal bone loss (0.2 mm more) than short implants; splinted implants showed greater crestal bone loss (0.2 mm more) than nonsplinted ones. These differences were statistically significant. DISCUSSION AND CONCLUSIONS: Sintered porous-surfaced implants performed well in short lengths (7 mm or less) in this series of partially edentulous patients. The data suggested that long implants and/or splinting can result in greater crestal bone loss; longer implants and splinted implants appeared to favor greater crestal bone loss in this investigation. These conclusions are, of course, specific to the implants used and would not be relevant to other implant types.

Key concepts: Crown (dentistry), Dentistry, Implant, Medicine, Radiography, Orthodontics, Materials science, Surgery

Related papers

Back to paper searchBrowse research topicsOriginal source
An assessment of crown-to-root ratios with short sintered porous-surfaced implants supporting prostheses in partially edentulous patients. — Research Paper | ScholarLens