Plastic Collapse Assessment Procedure for Vessel With Local Thin Area Simultaneously Subjected to Internal Pressure and External Bending Moment

Abstract Assessment of the local thin area should be undertaken for both tension and compression bending. In this paper, simplified reference stresses for a flaw in a cylinder are proposed. By using these results, a newly developed p-M (internal pressure ratio and external bending moment ratio) diagram which can evaluate the collapse condition for pressure equipment such as vessels, piping, and storage tanks with a local thin area simultaneously subjected to internal pressure p and external bending moment M due to earthquake, etc., is proposed. The p-M line is verified by comparison with the finite element analysis results and the numerous results of experiment for a cylinder with a volumetric flaw obtained through the reference literatures. It was clarified that the differences in collapse limit between the p-M line and DNV guideline under both internal pressure and compression moment became evident where the outer diameter/wall thickness of a cylinder is large and the yield ratio of the material is small.