2007Unpublished venueRequires access

Evaluation of Single Event Upset Mitigation Schemes for SRAM based FPGAs using the FLIPPER Fault Injection Platform

M. Alderighi, F. Casini, S. D’Angelo, M. Mancini, S. Pastore, G.R. Sechi, Roland Weigand

Open publisher page 106 citations

Abstract

SRAM based reprogrammable FPGAs are sensitive to radiation-induced single event upsets (SEU), not only in their user flip-flops and memory, but also in the configuration memory. Appropriate mitigation has to be applied if they are used in space, for example the XTMR scheme implemented by the Xilinx TMRTool and configuration scrubbing. The FLIPPER fault injection platform, described in this paper, allows testing the efficiency of the SEU mitigation scheme. FLIPPER emulates SEU-like faults by doing partial reconfiguration and then applies stimuli derived from HDL simulation (VHDL/Verilog test-bench), while comparing the outputs with the golden pattern, also derived from simulation. FLIPPER has its device-under-test (DUT) FPGA on a mezzanine board, allowing an easy exchange of the DUT device. Results from a test campaign are presented using a design from space application and applying various levels of TMR mitigation.

About this research paper

What this paper is about

SRAM based reprogrammable FPGAs are sensitive to radiation-induced single event upsets (SEU), not only in their user flip-flops and memory, but also in the configuration memory. Appropriate mitigation has to be applied if they are used in space, for example the XTMR scheme implemented by the Xilinx TMRTool and configuration scrubbing. The FLIPPER fault injection platform, described in this paper, allows testing the efficiency of the SEU mitigation scheme. FLIPPER emulates SEU-like faults by doing partial reconfiguration and then applies stimuli derived from HDL simulation (VHDL/Verilog test-bench), while comparing the outputs with the golden pattern, also derived from simulation. FLIPPER has its device-under-test (DUT) FPGA on a mezzanine board, allowing an easy exchange of the DUT device. Results from a test campaign are presented using a design from space application and applying various levels of TMR mitigation.

Why it matters

OpenAlex reports 106 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

SRAM based reprogrammable FPGAs are sensitive to radiation-induced single event upsets (SEU), not only in their user flip-flops and memory, but also in the configuration memory. Appropriate mitigation has to be applied if they are used in space, for example the XTMR scheme implemented by the Xilinx TMRTool and configuration scrubbing. The FLIPPER fault injection platform, described in this paper, allows testing the efficiency of the SEU mitigation scheme. FLIPPER emulates SEU-like faults by doing partial reconfiguration and then applies stimuli derived from HDL simulation (VHDL/Verilog test-bench), while comparing the outputs with the golden pattern, also derived from simulation. FLIPPER has its device-under-test (DUT) FPGA on a mezzanine board, allowing an easy exchange of the DUT device. Results from a test campaign are presented using a design from space application and applying various levels of TMR mitigation.

Key concepts: Single event upset, Field-programmable gate array, Static random-access memory, Fault injection, Control reconfiguration, Embedded system, Upset, Verilog

Related papers

Back to paper searchBrowse research topicsOriginal source
Evaluation of Single Event Upset Mitigation Schemes for SRAM based FPGAs using the FLIPPER Fault Injection Platform — Research Paper | ScholarLens