Removal of Direct Yellow 12 from Water Samples by Cloud Point Extraction Using Triton X‐100 as Nonionic Surfactant
Shahnaz Abedi, Farzin Nekouei
Abstract
Open-access reader
Shahnaz Abedi, Farzin Nekouei
Abstract
Open-access reader
A surfactant mediated cloud point extraction (CPE) procedure has been developed to remove color from wastewater containing direct yellow 12 (Chrysophenine G), using triton x‐100 (TX‐100) as nonionic surfactant. The effects of the concentration of the surfactant, pH, temperature and salt concentration on the different concentration of dye have been studied and optimum conditions were obtained for the removal of direct yellow 12 (DY 12). The concentration of DY 12 in the dilute phase was measured using UV‐Vis spectrophotometer. It was found that the separation of phases was complete and the recovery of DY 12 was very effective in the presence of NaCl as an electrolyte. The results showed that up to 600 mg L−1 of DY 12 can quantitatively be removed (>96%) by Cloud point extraction procedure in a single extraction using optimum conditions.
OpenAlex reports 19 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
A surfactant mediated cloud point extraction (CPE) procedure has been developed to remove color from wastewater containing direct yellow 12 (Chrysophenine G), using triton x‐100 (TX‐100) as nonionic surfactant. The effects of the concentration of the surfactant, pH, temperature and salt concentration on the different concentration of dye have been studied and optimum conditions were obtained for the removal of direct yellow 12 (DY 12). The concentration of DY 12 in the dilute phase was measured using UV‐Vis spectrophotometer. It was found that the separation of phases was complete and the recovery of DY 12 was very effective in the presence of NaCl as an electrolyte. The results showed that up to 600 mg L−1 of DY 12 can quantitatively be removed (>96%) by Cloud point extraction procedure in a single extraction using optimum conditions.
Key concepts: Cloud point, Chemistry, Pulmonary surfactant, Extraction (chemistry), Chromatography, Triton X-100, Electrolyte, Nonionic surfactant