A 150mA Low Noise, High PSRR Low-Dropout Linear Regulator in 0.13μm Technology for RF SoC Applications
Kae Ann Wong, David J. Evans
Abstract
Kae Ann Wong, David J. Evans
Abstract
An integrated low-noise, high power supply rejection ratio (PSRR), low-dropout (LDO) linear regulator has been developed in Texas Instruments' (TI) 130nm CMOS technology. The LDO regulator is capable of producing a regulated output voltage of 2.8 V from a Li-ion battery supply, with a dropout voltage of 200 mV while supplying a load current of 150 mA. The LDO regulator features > 65 dB PSRR at 20 kHz, and > 40 dB up to 1 MHz. The LDO regulator also features output noise performance ofrms/radicHz at 100Hz. The LDO die area is 0.166 mm2and the maximum no-load power consumption is 450μW.
OpenAlex reports 78 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
An integrated low-noise, high power supply rejection ratio (PSRR), low-dropout (LDO) linear regulator has been developed in Texas Instruments' (TI) 130nm CMOS technology. The LDO regulator is capable of producing a regulated output voltage of 2.8 V from a Li-ion battery supply, with a dropout voltage of 200 mV while supplying a load current of 150 mA. The LDO regulator features > 65 dB PSRR at 20 kHz, and > 40 dB up to 1 MHz. The LDO regulator also features output noise performance ofrms/radicHz at 100Hz. The LDO die area is 0.166 mm2and the maximum no-load power consumption is 450μW.
Key concepts: Power supply rejection ratio, Low-dropout regulator, Regulator, Dropout voltage, CMOS, Voltage regulator, Linear regulator, Electrical engineering