2008•American MineralogistRequires access

Synthetic hypersilicic Cl-bearing mica in the phlogopite-celadonite join: A multimethodical characterization of the missing link between di- and tri-octahedral micas at high pressures

Sabrina Nazzareni, Paola Comodi, Luca Bindi, О. Г. Сафонов, Yu. А. Litvin, Leonid L. Perchuk

Open publisher page 21 citations

Abstract

A hypersilicic Cl-bearing mica was synthesized at 4 GPa and 1200-1250 °C, close to the solidus of the join diopside-jadeite-KCl, in association with diopside-jadeite pyroxene, K-rich aluminosilicate glass and/or sanidine and (K,Na)Cl. The mica shows a negative correlation between tetrahedral Si and octahedral (Al + Mg), suggesting an Al-celadonitic substitution (Si + VI Al + VI □ = IV Al + VI Mg) and a chemical formula: K 1.01 (Mg 2.45 Al 0.19 □ 0.35 ) Σ=3 (Si 3.5 2Al 0.48 ) Σ=4 O 10 [(OH,O) 1.66 Cl 0.34 )] Σ=2 . The presence of hydroxyl was confirmed by OH stretching modes at 3734 and 3606 cm -1 in the Raman spectra. Singlecrystal X-ray diffraction data provide the unit-cell parameters (space group C2/m, 1M polytype): a = 5.299(4), b = 9.167(3), c = 10.226(3) Å, β =100.06(4)°, V = 489.1(4) Å 3 . The structure refinement shows the presence of vacancies on the octahedral sites (15% for M1 and 6.5% for M2). Chlorine occupies a position about 0.5 Å from O4 with partial occupancy (0.39 apfu). Crystal-chemical mechanisms seem to govern chlorine incorporation in mica, since a large A site is necessary to locate the anion in the structure. A large A site results when the six-tetrahedra ring is hexagonal and the tetrahedral rotation angle α is 0°. Such a geometry is achieved either by increasing the annite component in biotite or by increasing the hypersilicic character of phlogopite through the Al-celadonite substitution. The present Si-rich mica shows a partial dioctahedral character due to the Al-celadonite substitution, which lowers the α angle and expands its stability field at high pressure. High a K₂O conditions, like in potassium-rich brine or potassic carbonatitic melts, increase the Alceladonite component in the phlogopite solid solution, explaining the association of Si-rich micas with inclusions of potassic liquids in kimberlitic diamonds.

About this research paper

What this paper is about

A hypersilicic Cl-bearing mica was synthesized at 4 GPa and 1200-1250 °C, close to the solidus of the join diopside-jadeite-KCl, in association with diopside-jadeite pyroxene, K-rich aluminosilicate glass and/or sanidine and (K,Na)Cl. The mica shows a negative correlation between tetrahedral Si and octahedral (Al + Mg), suggesting an Al-celadonitic substitution (Si + VI Al + VI □ = IV Al + VI Mg) and a chemical formula: K 1.01 (Mg 2.45 Al 0.19 □ 0.35 ) Σ=3 (Si 3.5 2Al 0.48 ) Σ=4 O 10 [(OH,O) 1.66 Cl 0.34 )] Σ=2 . The presence of hydroxyl was confirmed by OH stretching modes at 3734 and 3606 cm -1 in the Raman spectra. Singlecrystal X-ray diffraction data provide the unit-cell parameters (space group C2/m, 1M polytype): a = 5.299(4), b = 9.167(3), c = 10.226(3) Å, β =100.06(4)°, V = 489.1(4) Å 3 . The structure refinement shows the presence of vacancies on the octahedral sites (15% for M1 and 6.5% for M2). Chlorine occupies a position about 0.5 Å from O4 with partial occupancy (0.39 apfu). Crystal-chemical mechanisms seem to govern chlorine incorporation in mica, since a large A site is necessary to locate the anion in the structure. A large A site results when the six-tetrahedra ring is hexagonal and the tetrahedral rotation angle α is 0°. Such a geometry is achieved either by increasing the annite component in biotite or by increasing the hypersilicic character of phlogopite through the Al-celadonite substitution. The present Si-rich mica shows a partial dioctahedral character due to the Al-celadonite substitution, which lowers the α angle and expands its stability field at high pressure. High a K₂O conditions, like in potassium-rich brine or potassic carbonatitic melts, increase the Alceladonite component in the phlogopite solid solution, explaining the association of Si-rich micas with inclusions of potassic liquids in kimberlitic diamonds.

Why it matters

OpenAlex reports 21 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

A hypersilicic Cl-bearing mica was synthesized at 4 GPa and 1200-1250 °C, close to the solidus of the join diopside-jadeite-KCl, in association with diopside-jadeite pyroxene, K-rich aluminosilicate glass and/or sanidine and (K,Na)Cl. The mica shows a negative correlation between tetrahedral Si and octahedral (Al + Mg), suggesting an Al-celadonitic substitution (Si + VI Al + VI □ = IV Al + VI Mg) and a chemical formula: K 1.01 (Mg 2.45 Al 0.19 □ 0.35 ) Σ=3 (Si 3.5 2Al 0.48 ) Σ=4 O 10 [(OH,O) 1.66 Cl 0.34 )] Σ=2 . The presence of hydroxyl was confirmed by OH stretching modes at 3734 and 3606 cm -1 in the Raman spectra. Singlecrystal X-ray diffraction data provide the unit-cell parameters (space group C2/m, 1M polytype): a = 5.299(4), b = 9.167(3), c = 10.226(3) Å, β =100.06(4)°, V = 489.1(4) Å 3 . The structure refinement shows the presence of vacancies on the octahedral sites (15% for M1 and 6.5% for M2). Chlorine occupies a position about 0.5 Å from O4 with partial occupancy (0.39 apfu). Crystal-chemical mechanisms seem to govern chlorine incorporation in mica, since a large A site is necessary to locate the anion in the structure. A large A site results when the six-tetrahedra ring is hexagonal and the tetrahedral rotation angle α is 0°. Such a geometry is achieved either by increasing the annite component in biotite or by increasing the hypersilicic character of phlogopite through the Al-celadonite substitution. The present Si-rich mica shows a partial dioctahedral character due to the Al-celadonite substitution, which lowers the α angle and expands its stability field at high pressure. High a K₂O conditions, like in potassium-rich brine or potassic carbonatitic melts, increase the Alceladonite component in the phlogopite solid solution, explaining the association of Si-rich micas with inclusions of potassic liquids in kimberlitic diamonds.

Key concepts: Phlogopite, Mica, Octahedron, Diopside, Crystallography, Crystal structure, Chemistry, Materials science

Related papers

Back to paper searchBrowse research topicsOriginal source
Synthetic hypersilicic Cl-bearing mica in the phlogopite-celadonite join: A multimethodical characterization of the missing link between di- and tri-octahedral micas at high pressures — Research Paper | ScholarLens