1999•SedimentologyRequires access

Beach fetch distance and aeolian sediment transport

Derek Jackson, Andrew Cooper

Open publisher page 84 citations

Abstract

An experiment was conducted to examine the influence of fetch distance on aeolian sediment transport on a natural sand beach at Benone Strand, County Londonderry, Northern Ireland. The site consisted of a wide dissipative beach, approximately 150 m wide at low tide and 80 m wide during high tide. Surface moisture levels (and hence dry fetch distance) were dictated by both local groundwater, from a stream outlet across the beach, as well as local tidal levels. An abundant dry sediment supply was available during the experiment. High‐resolution (1 Hz) measurements were made of wind speed and direction along with sediment flux. Wind velocity ranged from 2·1 to 8·1 m s–1 during the study. Second‐order polynomial sand transport equations were derived from the wind speed and trap results with r2 values of better than 0·93 for all data. When the data were sorted into velocity bins of 1 m s–1, there was no discernible relationship between fetch distance and sand transport, with a measured fetch distance range of 10–58 m available during the experiment. Results show that fetch distance is unimportant when an adequate sand supply is available. However, it is suggested that fetch may restrict the development of steady‐state transport under sediment‐limited conditions. Sediment availability is thus identified as a key variable in aeolian transport studies on natural beaches.

About this research paper

What this paper is about

An experiment was conducted to examine the influence of fetch distance on aeolian sediment transport on a natural sand beach at Benone Strand, County Londonderry, Northern Ireland. The site consisted of a wide dissipative beach, approximately 150 m wide at low tide and 80 m wide during high tide. Surface moisture levels (and hence dry fetch distance) were dictated by both local groundwater, from a stream outlet across the beach, as well as local tidal levels. An abundant dry sediment supply was available during the experiment. High‐resolution (1 Hz) measurements were made of wind speed and direction along with sediment flux. Wind velocity ranged from 2·1 to 8·1 m s–1 during the study. Second‐order polynomial sand transport equations were derived from the wind speed and trap results with r2 values of better than 0·93 for all data. When the data were sorted into velocity bins of 1 m s–1, there was no discernible relationship between fetch distance and sand transport, with a measured fetch distance range of 10–58 m available during the experiment. Results show that fetch distance is unimportant when an adequate sand supply is available. However, it is suggested that fetch may restrict the development of steady‐state transport under sediment‐limited conditions. Sediment availability is thus identified as a key variable in aeolian transport studies on natural beaches.

Why it matters

OpenAlex reports 84 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

An experiment was conducted to examine the influence of fetch distance on aeolian sediment transport on a natural sand beach at Benone Strand, County Londonderry, Northern Ireland. The site consisted of a wide dissipative beach, approximately 150 m wide at low tide and 80 m wide during high tide. Surface moisture levels (and hence dry fetch distance) were dictated by both local groundwater, from a stream outlet across the beach, as well as local tidal levels. An abundant dry sediment supply was available during the experiment. High‐resolution (1 Hz) measurements were made of wind speed and direction along with sediment flux. Wind velocity ranged from 2·1 to 8·1 m s–1 during the study. Second‐order polynomial sand transport equations were derived from the wind speed and trap results with r2 values of better than 0·93 for all data. When the data were sorted into velocity bins of 1 m s–1, there was no discernible relationship between fetch distance and sand transport, with a measured fetch distance range of 10–58 m available during the experiment. Results show that fetch distance is unimportant when an adequate sand supply is available. However, it is suggested that fetch may restrict the development of steady‐state transport under sediment‐limited conditions. Sediment availability is thus identified as a key variable in aeolian transport studies on natural beaches.

Key concepts: Fetch, Aeolian processes, Sediment transport, Sediment, Geology, Wind speed, Hydrology (agriculture), Oceanography

Related papers

Back to paper searchBrowse research topicsOriginal source
Beach fetch distance and aeolian sediment transport — Research Paper | ScholarLens