Improving the performance of automatic sequential test generation by targeting hard-to-test faults

Automatic test pattern generation (ATPG) for sequential circuits usually involves search for a sequence of vectors to detect single stuck-at faults. The sequential search space is exponential in the memory elements and primary inputs. Existing sequential test generators are known to spend substantial amounts of run-time in searching for test sequences to detect hard-to-test faults. In this paper, we present a pre-process stage that precedes sequential test generation for each hard-to-test fault and prunes the sequential search space, which in turn reduces the test generation time for these faults. In this stage, the effects of different conditions imposed on the circuit for test generation are propagated as far as possible. This process requires only a single pass through the iterative array model of the given circuit. Using the pre-process stage along with a Boolean satisfiability (SAT) based sequential test generator, we show that the proposed approach is on an average 11.3/spl times/ (maximum 25.2/spl times/) faster than an efficient gate-level sequential test generator for hard-to-test faults in ISCAS'89 benchmark circuits. The proposed pre-process stage is also applicable to sequential test generation at the register-transfer level (RTL) and improves the overall performance of an efficient sequential test generator at the RTL by 3.5/spl times/ on average and a maximum of 4.6/spl times/ for all faults.