USE OF SODA FELDSPAR IN WHITEWARE BODIES *

A bstract A comparative study is presented of a soda feldspar produced by a flotation process and of two potash feldspars when tested alone and made up in semivitreous and vitreous bodies. The investigation was divided into two parts, (1) a laboratory study and (2) plant trials on semivitreous dinnerware and on vitreous sanitary porcelain. From the results of the investigation, it was concluded that (1) it should be possible to substitute soda feldspar for North Carolina potash feldspar in semivitreous bodies containing not more than 12% feldspar, on an equal basis, with no significant change in properties except possibly crazing resistance; where crazing occurs, a slight modification of the regular glaze to give it a lower thermal expansion should correct the trouble; the formula of one modified glaze for this purpose is suggested; and (2) the substitution of soda feldspar for potash feldspar in sanitary porcelain and other similar vitreous whiteware bodies will doubtless require a reduction in amount in order to duplicate the vitrification and other properties of the potash‐feldspar body in use; a modification of the regular glaze to fit the soda‐feldspar body will probably be required; and the castability and control of casting slips should not be affected by the use of soda feldspar in place of potash feldspar.