1976IEEE Transactions on Microwave Theory and TechniquesRequires access

Microwave MESFET Mixer

Osamu Kurita, Kozo Morita

Open publisher page 32 citations

Abstract

GaAs metal-semiconductor FET's (MESFET) are developed for use in amplifiers at microwave frequencies. The FET has a Schottky barrier between the gate and source, operating in the same manner as a Schottky-barrier diode. If the Schottky barrier is used as a mixer, the IF signal is generated and simultaneously amplified by the FET itself. Thus a mixer with IF preamplifier can be realized. In this paper the theoretical and experimental results of a FET mixer are described. In such operations, the conversion loss in the freqnency conversion alone is large due to the high series resistance of the Schottky barrier. However, the overall FET mixer has a "conversion gain" because the IF gain of the FET is made large. The experimental conversion gain is 6 dB at the RF frequency of 10.8 GHz and the IF frequency of 1.7 GHz. The noise figure of the FET mixer is at present large (15 dB, for example), due to large conversion loss in the frequency conversion.

About this research paper

What this paper is about

GaAs metal-semiconductor FET's (MESFET) are developed for use in amplifiers at microwave frequencies. The FET has a Schottky barrier between the gate and source, operating in the same manner as a Schottky-barrier diode. If the Schottky barrier is used as a mixer, the IF signal is generated and simultaneously amplified by the FET itself. Thus a mixer with IF preamplifier can be realized. In this paper the theoretical and experimental results of a FET mixer are described. In such operations, the conversion loss in the freqnency conversion alone is large due to the high series resistance of the Schottky barrier. However, the overall FET mixer has a "conversion gain" because the IF gain of the FET is made large. The experimental conversion gain is 6 dB at the RF frequency of 10.8 GHz and the IF frequency of 1.7 GHz. The noise figure of the FET mixer is at present large (15 dB, for example), due to large conversion loss in the frequency conversion.

Why it matters

OpenAlex reports 32 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

GaAs metal-semiconductor FET's (MESFET) are developed for use in amplifiers at microwave frequencies. The FET has a Schottky barrier between the gate and source, operating in the same manner as a Schottky-barrier diode. If the Schottky barrier is used as a mixer, the IF signal is generated and simultaneously amplified by the FET itself. Thus a mixer with IF preamplifier can be realized. In this paper the theoretical and experimental results of a FET mixer are described. In such operations, the conversion loss in the freqnency conversion alone is large due to the high series resistance of the Schottky barrier. However, the overall FET mixer has a "conversion gain" because the IF gain of the FET is made large. The experimental conversion gain is 6 dB at the RF frequency of 10.8 GHz and the IF frequency of 1.7 GHz. The noise figure of the FET mixer is at present large (15 dB, for example), due to large conversion loss in the frequency conversion.

Key concepts: MESFET, Schottky diode, Optoelectronics, Electronic mixer, Materials science, Schottky barrier, Frequency mixer, Microwave

Related papers

Back to paper searchBrowse research topicsOriginal source
Microwave MESFET Mixer — Research Paper | ScholarLens