2004Clinical Oral Implants ResearchRequires access

Implant stability measurement of delayed and immediately loaded implants during healing.

Mark Bischof, Rabah Nedir, Serge Szmukler­-Moncler, Jean‐Pierre Bernard, Jacky Samson

Open publisher page 331 citations

Abstract

The purpose of the present study was (1) to measure the primary stability of ITI implants placed in both jaws and determine the factors that affect the implant stability quotient (ISQ) determined by the resonance frequency method and (2) to monitor implant stability during the first 3 months of healing and evaluate any difference between immediately loaded (IL) implants and standard delayed loaded (DL) implants. The IL and DL groups consisted of 18 patients/63 implants and 18 patients/43 implants. IL implants were loaded after 2 days; DL implants were left to heal according to the one-stage procedure. The ISQ was recorded with an Osstell apparatus (Integration Diagnostics AB, Gothenburg, Sweden) at implant placement, after 1, 2, 4, 6, 8, 10 and 12 weeks. Primary stability was affected by the jaw and the bone type. The ISQ was higher in the mandible (59.8+/-6.7) than the maxilla (55.0+/-6.8). The ISQ was significantly higher in type I bone (62.8+/-7.2) than in type III bone (56.0+/-7.8). The implant position, implant length, implant diameter and implant deepening (esthetic plus implants) did not affect primary stability. After 3 months, the gain in stability was higher in the mandible than in the maxilla. The influence of bone type was leveled off and bone quality did not affect implant stability. The resonance-frequency analysis method did not reveal any difference in implant stability between the IL and DL implants over the healing period. Implant stability remained constant or increased slightly during the first 4-6 weeks and then increased more markedly. One DL and IL implant failed; both were 8 mm long placed in type III bone. At the 1-year control, the survival rate of the IL and the DL implants was 98.4% and 97.7%, respectively. This study showed no difference in implant stability between the IL and DL procedures over the first 3 months. IL short-span bridges placed in the posterior region and full arch rehabilitation of the maxilla with ITI sandblasted-and-etched implants were highly predictable.

About this research paper

What this paper is about

The purpose of the present study was (1) to measure the primary stability of ITI implants placed in both jaws and determine the factors that affect the implant stability quotient (ISQ) determined by the resonance frequency method and (2) to monitor implant stability during the first 3 months of healing and evaluate any difference between immediately loaded (IL) implants and standard delayed loaded (DL) implants. The IL and DL groups consisted of 18 patients/63 implants and 18 patients/43 implants. IL implants were loaded after 2 days; DL implants were left to heal according to the one-stage procedure. The ISQ was recorded with an Osstell apparatus (Integration Diagnostics AB, Gothenburg, Sweden) at implant placement, after 1, 2, 4, 6, 8, 10 and 12 weeks. Primary stability was affected by the jaw and the bone type. The ISQ was higher in the mandible (59.8+/-6.7) than the maxilla (55.0+/-6.8). The ISQ was significantly higher in type I bone (62.8+/-7.2) than in type III bone (56.0+/-7.8). The implant position, implant length, implant diameter and implant deepening (esthetic plus implants) did not affect primary stability. After 3 months, the gain in stability was higher in the mandible than in the maxilla. The influence of bone type was leveled off and bone quality did not affect implant stability. The resonance-frequency analysis method did not reveal any difference in implant stability between the IL and DL implants over the healing period. Implant stability remained constant or increased slightly during the first 4-6 weeks and then increased more markedly. One DL and IL implant failed; both were 8 mm long placed in type III bone. At the 1-year control, the survival rate of the IL and the DL implants was 98.4% and 97.7%, respectively. This study showed no difference in implant stability between the IL and DL procedures over the first 3 months. IL short-span bridges placed in the posterior region and full arch rehabilitation of the maxilla with ITI sandblasted-and-etched implants were highly predictable.

Why it matters

OpenAlex reports 331 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

The purpose of the present study was (1) to measure the primary stability of ITI implants placed in both jaws and determine the factors that affect the implant stability quotient (ISQ) determined by the resonance frequency method and (2) to monitor implant stability during the first 3 months of healing and evaluate any difference between immediately loaded (IL) implants and standard delayed loaded (DL) implants. The IL and DL groups consisted of 18 patients/63 implants and 18 patients/43 implants. IL implants were loaded after 2 days; DL implants were left to heal according to the one-stage procedure. The ISQ was recorded with an Osstell apparatus (Integration Diagnostics AB, Gothenburg, Sweden) at implant placement, after 1, 2, 4, 6, 8, 10 and 12 weeks. Primary stability was affected by the jaw and the bone type. The ISQ was higher in the mandible (59.8+/-6.7) than the maxilla (55.0+/-6.8). The ISQ was significantly higher in type I bone (62.8+/-7.2) than in type III bone (56.0+/-7.8). The implant position, implant length, implant diameter and implant deepening (esthetic plus implants) did not affect primary stability. After 3 months, the gain in stability was higher in the mandible than in the maxilla. The influence of bone type was leveled off and bone quality did not affect implant stability. The resonance-frequency analysis method did not reveal any difference in implant stability between the IL and DL implants over the healing period. Implant stability remained constant or increased slightly during the first 4-6 weeks and then increased more markedly. One DL and IL implant failed; both were 8 mm long placed in type III bone. At the 1-year control, the survival rate of the IL and the DL implants was 98.4% and 97.7%, respectively. This study showed no difference in implant stability between the IL and DL procedures over the first 3 months. IL short-span bridges placed in the posterior region and full arch rehabilitation of the maxilla with ITI sandblasted-and-etched implants were highly predictable.

Key concepts: Implant stability quotient, Resonance frequency analysis, Implant, Dentistry, Osseointegration, Mandible (arthropod mouthpart), Maxilla, Medicine

Related papers

Back to paper searchBrowse research topicsOriginal source
Implant stability measurement of delayed and immediately loaded implants during healing. — Research Paper | ScholarLens