Wide-band integrated optical receiver with improved dynamic range using a current switch at the input
L.A.D. van den Broeke, A. J. Nieuwkerk
Abstract
Open-access reader
L.A.D. van den Broeke, A. J. Nieuwkerk
Abstract
Open-access reader
The front end of optical transmission systems usually consists of a low-noise, wide-band, negative-feedback transimpedance or current amplifier. The dynamic range of current amplifiers can be extended considerably by passing large input currents directly to the output of the amplifier. It is shown that the required current switch does not deteriorate the sensitivity of the receiver. A complete front end, using an external p-i-n photodiode, is integrated in a 2.5-GHz bipolar technology. The receiver has a dynamic range (DR) of 73 dB in a bandwidth of 220 MHz and consumes a supply current of 1.5 mA.>
OpenAlex reports 27 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
The front end of optical transmission systems usually consists of a low-noise, wide-band, negative-feedback transimpedance or current amplifier. The dynamic range of current amplifiers can be extended considerably by passing large input currents directly to the output of the amplifier. It is shown that the required current switch does not deteriorate the sensitivity of the receiver. A complete front end, using an external p-i-n photodiode, is integrated in a 2.5-GHz bipolar technology. The receiver has a dynamic range (DR) of 73 dB in a bandwidth of 220 MHz and consumes a supply current of 1.5 mA.>
Key concepts: Transimpedance amplifier, Dynamic range, Photodiode, Wide dynamic range, Amplifier, Bandwidth (computing), Electrical engineering, Current (fluid)