ScholarLens Back to search
2005•IEEE Journal of Solid-State CircuitsRequires access

A 20-GHz low-noise amplifier with active balun in a 0.25-/spl mu/m SiGe BICMOS technology

B. Welch, Kevin Kornegay, Hyunmin Park, J. Laskar

Open publisher page 36 citations

Abstract

A 20-GHz low-noise amplifier (LNA) with an active balun fabricated in a 0.25-/spl mu/m SiGe BICMOS (f/sub t/=47 GHz) technology was presented by the authors in 2004. The LNA achieves close to 7 dB of gain and a noise figure of 4.9 dB with all ports simultaneously matched to 50 /spl Omega/ with better than -16 dB of return loss. The amplifier is highly linear with an IP/sub 1dB/ of 0 dBm and IIP/sub 3/ of 9 dBm, while consuming 14 mA of quiescent current from a 3.3-V rail, with temperature-compensated biasing. To the authors' knowledge, the LNA delivers the lowest reported noise figure and highest linearity for a silicon implementation of a combined active balun and LNA at 20 GHz, and is the first implementation of an active balun with an LC degenerated emitter-coupled pair. Here we expand on that work, with an analysis of the balun operation and noise optimization of the design.

About this research paper

What this paper is about

A 20-GHz low-noise amplifier (LNA) with an active balun fabricated in a 0.25-/spl mu/m SiGe BICMOS (f/sub t/=47 GHz) technology was presented by the authors in 2004. The LNA achieves close to 7 dB of gain and a noise figure of 4.9 dB with all ports simultaneously matched to 50 /spl Omega/ with better than -16 dB of return loss. The amplifier is highly linear with an IP/sub 1dB/ of 0 dBm and IIP/sub 3/ of 9 dBm, while consuming 14 mA of quiescent current from a 3.3-V rail, with temperature-compensated biasing. To the authors' knowledge, the LNA delivers the lowest reported noise figure and highest linearity for a silicon implementation of a combined active balun and LNA at 20 GHz, and is the first implementation of an active balun with an LC degenerated emitter-coupled pair. Here we expand on that work, with an analysis of the balun operation and noise optimization of the design.

Why it matters

OpenAlex reports 36 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

A 20-GHz low-noise amplifier (LNA) with an active balun fabricated in a 0.25-/spl mu/m SiGe BICMOS (f/sub t/=47 GHz) technology was presented by the authors in 2004. The LNA achieves close to 7 dB of gain and a noise figure of 4.9 dB with all ports simultaneously matched to 50 /spl Omega/ with better than -16 dB of return loss. The amplifier is highly linear with an IP/sub 1dB/ of 0 dBm and IIP/sub 3/ of 9 dBm, while consuming 14 mA of quiescent current from a 3.3-V rail, with temperature-compensated biasing. To the authors' knowledge, the LNA delivers the lowest reported noise figure and highest linearity for a silicon implementation of a combined active balun and LNA at 20 GHz, and is the first implementation of an active balun with an LC degenerated emitter-coupled pair. Here we expand on that work, with an analysis of the balun operation and noise optimization of the design.

Key concepts: Balun, Low-noise amplifier, Noise figure, BiCMOS, Electrical engineering, Amplifier, Linearity, Optoelectronics

Related papers

Related paper 1Related paper 2
Back to paper searchBrowse research topicsOriginal source
A 20-GHz low-noise amplifier with active balun in a 0.25-/spl mu/m SiGe BICMOS technology — Research Paper | ScholarLens