1957Journal of The Electrochemical SocietyOpen access

Impedance and Polarization Measurements in Fused Lithium Chloride‐Potassium Chloride

H. A. Laitinen, Harish C. Gaur

Open full text 42 citations

Abstract

Impedance measurements with a platinum microelectrode in fused eutectic mixture of potassium chloride (41 mole %) and lithium chloride (59 mole %) are described. The residual resistance and capacitance showed frequency dispersion; probable causes are discussed. Most of the metal ions showed a tendency for “predeposition.” The faradaic admittance in the reduction of Pb++, Co++, Ni++, Zn++, and Cd++ ions had a phase angle of the combination greater than 45°, which has been ascribed to the adsorption of metal ions on the electrode surface. After application of an empirical correction for this effect, the faradaic admittance became normal and was used to calculate the rate constants for the above processes. The current‐potential curves showing the polarization behavior in the vicinity of equilibrium potential are described. By a curve fitting method the values of α, the transfer coefficient for the cathodic process, and i o , the exchange current, are computed. These values of i o are, however, much lower than those calculated by using the rate constants obtained from impedance measurements.

Open-access reader

About this research paper

What this paper is about

Impedance measurements with a platinum microelectrode in fused eutectic mixture of potassium chloride (41 mole %) and lithium chloride (59 mole %) are described. The residual resistance and capacitance showed frequency dispersion; probable causes are discussed. Most of the metal ions showed a tendency for “predeposition.” The faradaic admittance in the reduction of Pb++, Co++, Ni++, Zn++, and Cd++ ions had a phase angle of the combination greater than 45°, which has been ascribed to the adsorption of metal ions on the electrode surface. After application of an empirical correction for this effect, the faradaic admittance became normal and was used to calculate the rate constants for the above processes. The current‐potential curves showing the polarization behavior in the vicinity of equilibrium potential are described. By a curve fitting method the values of α, the transfer coefficient for the cathodic process, and i o , the exchange current, are computed. These values of i o are, however, much lower than those calculated by using the rate constants obtained from impedance measurements.

Why it matters

OpenAlex reports 42 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Impedance measurements with a platinum microelectrode in fused eutectic mixture of potassium chloride (41 mole %) and lithium chloride (59 mole %) are described. The residual resistance and capacitance showed frequency dispersion; probable causes are discussed. Most of the metal ions showed a tendency for “predeposition.” The faradaic admittance in the reduction of Pb++, Co++, Ni++, Zn++, and Cd++ ions had a phase angle of the combination greater than 45°, which has been ascribed to the adsorption of metal ions on the electrode surface. After application of an empirical correction for this effect, the faradaic admittance became normal and was used to calculate the rate constants for the above processes. The current‐potential curves showing the polarization behavior in the vicinity of equilibrium potential are described. By a curve fitting method the values of α, the transfer coefficient for the cathodic process, and i o , the exchange current, are computed. These values of i o are, however, much lower than those calculated by using the rate constants obtained from impedance measurements.

Key concepts: Analytical Chemistry (journal), Chloride, Chemistry, Materials science, Chromatography, Organic chemistry

Related papers

Back to paper searchBrowse research topicsOriginal source
Impedance and Polarization Measurements in Fused Lithium Chloride‐Potassium Chloride — Research Paper | ScholarLens