2014•Journal of Applied CrystallographyOpen access

High-resolution X-ray diffraction investigation on the evolution of the substructure of individual austenite grains in TRIP steels during tensile deformation

R. Blondé, Enrique Jimenez-Melero, R.M. Huizenga, Lie Zhao, Jonathan Paul Wright, E. Brück, Sybrand van der Zwaag, Niels van Dijk

Open full text 8 citations

Abstract

The martensitic transformation behaviour of the metastable austenite phase in low-alloyed transformation-induced plasticity (TRIP) steels has been studiedin situusing high-energy X-ray diffraction during deformation. The austenite stability during tensile deformation has been evaluated at different length scales. A powder diffraction analysis has been performed to correlate the macroscopic behaviour of the material to the observed changes in the volume phase fraction. Moreover, the austenite deformation response has been studied at the length scale of individual grains, where an in-depth characterization of four selected grains has been performed, including grain volume, local carbon concentration and grain orientation. For the first time, a high-resolution far-field detector was used to study the initial and evolving structure of individual austenite grains during uniaxial tensile deformation. It was found that the austenite subgrain size does not change significantly during tensile deformation. Most austenite grains show a complete martensitic transformation in a single loading step.

Open-access reader

About this research paper

What this paper is about

The martensitic transformation behaviour of the metastable austenite phase in low-alloyed transformation-induced plasticity (TRIP) steels has been studiedin situusing high-energy X-ray diffraction during deformation. The austenite stability during tensile deformation has been evaluated at different length scales. A powder diffraction analysis has been performed to correlate the macroscopic behaviour of the material to the observed changes in the volume phase fraction. Moreover, the austenite deformation response has been studied at the length scale of individual grains, where an in-depth characterization of four selected grains has been performed, including grain volume, local carbon concentration and grain orientation. For the first time, a high-resolution far-field detector was used to study the initial and evolving structure of individual austenite grains during uniaxial tensile deformation. It was found that the austenite subgrain size does not change significantly during tensile deformation. Most austenite grains show a complete martensitic transformation in a single loading step.

Why it matters

OpenAlex reports 8 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

The martensitic transformation behaviour of the metastable austenite phase in low-alloyed transformation-induced plasticity (TRIP) steels has been studiedin situusing high-energy X-ray diffraction during deformation. The austenite stability during tensile deformation has been evaluated at different length scales. A powder diffraction analysis has been performed to correlate the macroscopic behaviour of the material to the observed changes in the volume phase fraction. Moreover, the austenite deformation response has been studied at the length scale of individual grains, where an in-depth characterization of four selected grains has been performed, including grain volume, local carbon concentration and grain orientation. For the first time, a high-resolution far-field detector was used to study the initial and evolving structure of individual austenite grains during uniaxial tensile deformation. It was found that the austenite subgrain size does not change significantly during tensile deformation. Most austenite grains show a complete martensitic transformation in a single loading step.

Key concepts: Austenite, Materials science, Deformation (meteorology), Diffusionless transformation, Volume fraction, Martensite, Ultimate tensile strength, Metallurgy

Related papers

Back to paper searchBrowse research topicsOriginal source
High-resolution X-ray diffraction investigation on the evolution of the substructure of individual austenite grains in TRIP steels during tensile deformation — Research Paper | ScholarLens