2011Journal of the Chinese Chemical SocietyOpen access

Supercritical Carbon Dioxide Extraction of Salidroside from Rhodiola rosea L var. rosea Root

Yuxue Wu, Qiang Wang, Ben Liu, Men‐Yun You, Ting Jin

Open full text 11 citations

Abstract

Abstract Salidroside from the root of Rhodiola rosea L var. rosea was extracted by supercritical carbon dioxide with and without methanol as modifier. Three parameters, i.e. temperature, pressure and different concentrations of methanol were optimized. Salidroside determinations were carried out using high‐performance liquid chromatography (HPLC) with UV‐Vis detector. An experimental design of response surface methodology (RSM) was used to map the effect of pressure (at 200, 300 and 400 bar), temperature (at 50, 60 and 70 °C) and percentage of methanol modifier (at 80, 90 and 100%) on the extraction yield of the active compound and to determine the optimal conditions for the extraction of salidroside from the root of plant. The results showed that supercritical carbon dioxide failed to extract salidroside from the plant material without a methanol as modifier. The yield obtained after 1.5 h extraction with the rate of modifier 0.4 mL/min and 300 bar, 70 °C, and 80 percent of methanol modifier condition was the highest (17.15 mg/g). The optimum conditions were 70 °C, 295.49 bar and 80 percent of methanol as modifier with the yield of 16.17 mg/g. In addition, the yield obtained with supercritical fluid extraction (SFE) was compared with the Soxhlet extraction, whose yield was 8.64 mg/g.

Open-access reader

About this research paper

What this paper is about

Abstract Salidroside from the root of Rhodiola rosea L var. rosea was extracted by supercritical carbon dioxide with and without methanol as modifier. Three parameters, i.e. temperature, pressure and different concentrations of methanol were optimized. Salidroside determinations were carried out using high‐performance liquid chromatography (HPLC) with UV‐Vis detector. An experimental design of response surface methodology (RSM) was used to map the effect of pressure (at 200, 300 and 400 bar), temperature (at 50, 60 and 70 °C) and percentage of methanol modifier (at 80, 90 and 100%) on the extraction yield of the active compound and to determine the optimal conditions for the extraction of salidroside from the root of plant. The results showed that supercritical carbon dioxide failed to extract salidroside from the plant material without a methanol as modifier. The yield obtained after 1.5 h extraction with the rate of modifier 0.4 mL/min and 300 bar, 70 °C, and 80 percent of methanol modifier condition was the highest (17.15 mg/g). The optimum conditions were 70 °C, 295.49 bar and 80 percent of methanol as modifier with the yield of 16.17 mg/g. In addition, the yield obtained with supercritical fluid extraction (SFE) was compared with the Soxhlet extraction, whose yield was 8.64 mg/g.

Why it matters

OpenAlex reports 11 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Abstract Salidroside from the root of Rhodiola rosea L var. rosea was extracted by supercritical carbon dioxide with and without methanol as modifier. Three parameters, i.e. temperature, pressure and different concentrations of methanol were optimized. Salidroside determinations were carried out using high‐performance liquid chromatography (HPLC) with UV‐Vis detector. An experimental design of response surface methodology (RSM) was used to map the effect of pressure (at 200, 300 and 400 bar), temperature (at 50, 60 and 70 °C) and percentage of methanol modifier (at 80, 90 and 100%) on the extraction yield of the active compound and to determine the optimal conditions for the extraction of salidroside from the root of plant. The results showed that supercritical carbon dioxide failed to extract salidroside from the plant material without a methanol as modifier. The yield obtained after 1.5 h extraction with the rate of modifier 0.4 mL/min and 300 bar, 70 °C, and 80 percent of methanol modifier condition was the highest (17.15 mg/g). The optimum conditions were 70 °C, 295.49 bar and 80 percent of methanol as modifier with the yield of 16.17 mg/g. In addition, the yield obtained with supercritical fluid extraction (SFE) was compared with the Soxhlet extraction, whose yield was 8.64 mg/g.

Key concepts: Salidroside, Chemistry, Methanol, Rhodiola rosea, Extraction (chemistry), Supercritical carbon dioxide, Supercritical fluid extraction, Yield (engineering)

Related papers

Back to paper searchBrowse research topicsOriginal source
Supercritical Carbon Dioxide Extraction of Salidroside from Rhodiola rosea L var. rosea Root — Research Paper | ScholarLens