Catalytic pyrolysis of biomass by novel nanostructured catalysts
Phuong T. Dang, Hy G. Le, Giang T. T. Pham, Hông T. M. Vu, Kien T. Nguyen, Canh D. Dao, Giang H. Le, Thuy Thi Hoang, Hoa T. K. Tran, Quang K. Nguyen, Tuan A. Vu
Abstract
Phuong T. Dang, Hy G. Le, Giang T. T. Pham, Hông T. M. Vu, Kien T. Nguyen, Canh D. Dao, Giang H. Le, Thuy Thi Hoang, Hoa T. K. Tran, Quang K. Nguyen, Tuan A. Vu
Abstract
Nanostructured catalysts were successfully prepared by acidification of diatomites and the regeneration of used FCC catalysts. The obtained samples were characterized by IR, XRD, SEM, EDX, MAS-NMR (27Al and 29Si), NH3-TPD and tested in catalytic pyrolysis of biomass (rice straw). The results showed that the similar bio-oil yield of 41,4% can be obtained by pyrolysis in presence of catalysts at 450°C as compared to that of the pyrolysis without catalyst at 550°C. The bio-oil yield reached a maximum of 42,55 % at the pyrolysis temperature of 500°C with catalytic content of 20%. Moreover, by catalytic pyrolysis, bio-oil quality was better as reflected in higher ratio of H/C, lower ratio of O/C. This clearly indicated high application potential of these new nanostructured catalysts in the production of bio-oil with low oxygenated compounds.
OpenAlex reports 1 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
Nanostructured catalysts were successfully prepared by acidification of diatomites and the regeneration of used FCC catalysts. The obtained samples were characterized by IR, XRD, SEM, EDX, MAS-NMR (27Al and 29Si), NH3-TPD and tested in catalytic pyrolysis of biomass (rice straw). The results showed that the similar bio-oil yield of 41,4% can be obtained by pyrolysis in presence of catalysts at 450°C as compared to that of the pyrolysis without catalyst at 550°C. The bio-oil yield reached a maximum of 42,55 % at the pyrolysis temperature of 500°C with catalytic content of 20%. Moreover, by catalytic pyrolysis, bio-oil quality was better as reflected in higher ratio of H/C, lower ratio of O/C. This clearly indicated high application potential of these new nanostructured catalysts in the production of bio-oil with low oxygenated compounds.
Key concepts: Catalysis, Pyrolysis, Yield (engineering), Materials science, Biomass (ecology), Pyrolysis oil, Chemical engineering, Nuclear chemistry