A wide dynamic range CMOS image sensor with dual charge storage in a pixel and a multiple sampling technique
Suhaidi Shafie, Shoji Kawahito
Abstract
Suhaidi Shafie, Shoji Kawahito
Abstract
This paper presents a dynamic range expansion technique of CMOS image sensors with dual charge storage in a pixel and multiple exposures. Each pixel contains two photodiodes, PD1 and PD2 whose sensitivity can be set independently by the accumulation time. The difference of charge accumulation time in both photodiode can be manipulated to expand the dynamic range of the sensor. It allows flexible control of the dynamic range since the accumulation time in PD2 is adjustable. The multiple exposure technique used in the sensor reduces the motion blur in the synthesized wide dynamic range image when capturing fast-moving objects. It also reduces the signal-to-nose ratio dip at the switching point of the PD1 signal to the PD2 signals in the synthesized wide dynamic range image. A wide dynamic range camera with 320x240 pixels image sensor has been tested. It is found that the sampling of 4 times for the short accumulation time signals is sufficient for the reduction of motion blur in the synthesized wide dynamic range image, and the signal-to-noise ratio dip at the switching point of the PD1 signal to the PD2 signal is improved by 6 dB using 4 short-time exposures.
OpenAlex reports 9 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
This paper presents a dynamic range expansion technique of CMOS image sensors with dual charge storage in a pixel and multiple exposures. Each pixel contains two photodiodes, PD1 and PD2 whose sensitivity can be set independently by the accumulation time. The difference of charge accumulation time in both photodiode can be manipulated to expand the dynamic range of the sensor. It allows flexible control of the dynamic range since the accumulation time in PD2 is adjustable. The multiple exposure technique used in the sensor reduces the motion blur in the synthesized wide dynamic range image when capturing fast-moving objects. It also reduces the signal-to-nose ratio dip at the switching point of the PD1 signal to the PD2 signals in the synthesized wide dynamic range image. A wide dynamic range camera with 320x240 pixels image sensor has been tested. It is found that the sampling of 4 times for the short accumulation time signals is sufficient for the reduction of motion blur in the synthesized wide dynamic range image, and the signal-to-noise ratio dip at the switching point of the PD1 signal to the PD2 signal is improved by 6 dB using 4 short-time exposures.
Key concepts: Dynamic range, Image sensor, Pixel, Photodiode, High dynamic range, Wide dynamic range, SIGNAL (programming language), Computer science