Tip Opening and Burning Intensity of Bunsen Flames Diluted with Nitrogen.
Yukio Sakai, Katsuyuki KONISHI, Atsushi Ishihara
Abstract
Open-access reader
Yukio Sakai, Katsuyuki KONISHI, Atsushi Ishihara
Abstract
Open-access reader
Tip opening and burning intensity of Bunsen flames diluted with nitrogen have been experimentally investigated. Methane-air and propane-air flames were used in the experiment. The tip opening limit was mapped as a function of the equivalence ratio φ and added nitrogen ratio χ, and the tip temperature was measured. Results show that the burning at the tip was more intense in rich flame for methane and lean flame for propane. The maximum allowable dilution by nitrogen also occurs in rich flame (φ=1.05) for methane and lean flame (φ=0.94) for propane. The tip temperature decreases steeply with increasing χ if the methane flame is lean or the propane flame is rich, while it decreases gradually if the methane flame is rich or the propane flame is lean. These results at the tip were due to the preferential diffusion and nonunity Lewis number resulting from negative stretch induced by flame curvature. The flame responses presented here to preferential diffusion and Lewis number are the reverse those of positively stretched stagnation flames.
OpenAlex reports 4 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
Tip opening and burning intensity of Bunsen flames diluted with nitrogen have been experimentally investigated. Methane-air and propane-air flames were used in the experiment. The tip opening limit was mapped as a function of the equivalence ratio φ and added nitrogen ratio χ, and the tip temperature was measured. Results show that the burning at the tip was more intense in rich flame for methane and lean flame for propane. The maximum allowable dilution by nitrogen also occurs in rich flame (φ=1.05) for methane and lean flame (φ=0.94) for propane. The tip temperature decreases steeply with increasing χ if the methane flame is lean or the propane flame is rich, while it decreases gradually if the methane flame is rich or the propane flame is lean. These results at the tip were due to the preferential diffusion and nonunity Lewis number resulting from negative stretch induced by flame curvature. The flame responses presented here to preferential diffusion and Lewis number are the reverse those of positively stretched stagnation flames.
Key concepts: Bunsen burner, Flammability limit, Propane, Diffusion flame, Lewis number, Methane, Premixed flame, Chemistry