ScholarLens Back to search
2010•Key engineering materialsOpen access

Influence of Cooling Rate and Alloying Elements on Kinetics of Eutectoid Transformation in Spheroidal Graphite Cast Iron

Primož Mrvar, Mitja Petrič, Jožef Medved

Open full text 3 citations

Abstract

Paper deals with influence of cooling rate and alloying elements on kinetics of eutectoid transformation in spheroidal graphite cast iron (SGI). Transformation of austenite can proceed into ferrite and graphite (FeFeG) and/or in pearlite (Fe  FeFe3C). Examination of eutectoid transformation was made by evaluating the “in-situ” dilatation curves together with metallographic examinations, DTA, and dilatation analyses in solid state. ThermoCalc software was applied for thermodynamic calculations of phase equilibria. Based on numerous quantitative relations, such as relation between fractions of ferrite and pearlite in the as-cast SGI that was determined by analysis of dilatometric curves and taking into account also composition of melt, ferrite/pearlite ratio in the microstructure could be determined in a very short time. Thus the melt composition could be corrected by adding Cu and/or Mn or Si, respectively, using the "in situ" dilatation analyses. Characteristic temperatures of eutectoid transformation have been established from the kinetics of austenite transformation and from temperature dependence of ferrite and/or pearlite growth. Kinetics curves that enable to determine fractions of single microstructure constituents in the microstructure as function of transformation time, mainly used for ferrite and pearlite SGI, can be well determined with physical sigmoidal Boltzmann model.

About this research paper

What this paper is about

Paper deals with influence of cooling rate and alloying elements on kinetics of eutectoid transformation in spheroidal graphite cast iron (SGI). Transformation of austenite can proceed into ferrite and graphite (FeFeG) and/or in pearlite (Fe  FeFe3C). Examination of eutectoid transformation was made by evaluating the “in-situ” dilatation curves together with metallographic examinations, DTA, and dilatation analyses in solid state. ThermoCalc software was applied for thermodynamic calculations of phase equilibria. Based on numerous quantitative relations, such as relation between fractions of ferrite and pearlite in the as-cast SGI that was determined by analysis of dilatometric curves and taking into account also composition of melt, ferrite/pearlite ratio in the microstructure could be determined in a very short time. Thus the melt composition could be corrected by adding Cu and/or Mn or Si, respectively, using the "in situ" dilatation analyses. Characteristic temperatures of eutectoid transformation have been established from the kinetics of austenite transformation and from temperature dependence of ferrite and/or pearlite growth. Kinetics curves that enable to determine fractions of single microstructure constituents in the microstructure as function of transformation time, mainly used for ferrite and pearlite SGI, can be well determined with physical sigmoidal Boltzmann model.

Why it matters

OpenAlex reports 3 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Paper deals with influence of cooling rate and alloying elements on kinetics of eutectoid transformation in spheroidal graphite cast iron (SGI). Transformation of austenite can proceed into ferrite and graphite (FeFeG) and/or in pearlite (Fe  FeFe3C). Examination of eutectoid transformation was made by evaluating the “in-situ” dilatation curves together with metallographic examinations, DTA, and dilatation analyses in solid state. ThermoCalc software was applied for thermodynamic calculations of phase equilibria. Based on numerous quantitative relations, such as relation between fractions of ferrite and pearlite in the as-cast SGI that was determined by analysis of dilatometric curves and taking into account also composition of melt, ferrite/pearlite ratio in the microstructure could be determined in a very short time. Thus the melt composition could be corrected by adding Cu and/or Mn or Si, respectively, using the "in situ" dilatation analyses. Characteristic temperatures of eutectoid transformation have been established from the kinetics of austenite transformation and from temperature dependence of ferrite and/or pearlite growth. Kinetics curves that enable to determine fractions of single microstructure constituents in the microstructure as function of transformation time, mainly used for ferrite and pearlite SGI, can be well determined with physical sigmoidal Boltzmann model.

Key concepts: Pearlite, Ferrite (magnet), Materials science, Austenite, Eutectic system, Microstructure, Metallurgy, Graphite

Related papers

Related paper 1Related paper 2Related paper 3
Back to paper searchBrowse research topicsOriginal source
Influence of Cooling Rate and Alloying Elements on Kinetics of Eutectoid Transformation in Spheroidal Graphite Cast Iron — Research Paper | ScholarLens