1958Soil Science Society of America JournalRequires access

The Use of Portable Neutron Equipment to Measure the Quantity of Water in Large Soil Columns

L. V. Weeks, L. H. Stolzy

Open publisher page 4 citations

Abstract

Abstract The total water content (surface cm. of water) in 4 soil columns 91 cm. in diameter and from 80 to 110 cm. in depth was estimated periodically from readings taken with portable neutron equipment. The readings were taken with the detector tube placed at various depths in a centrally located “well” formed by an aluminum tube. The relationship between meter readings and percent moisture by volume for several mineral soil types had been previously determined by a field calibration procedure. Total water content values calculated by analytical and graphical methods were comparable. Reproducible water‐depletion curves for several irrigation cycles were shown as water was removed from the soil by tomato plants. Satisfactory agreement between the calculated changes of total water content and the measured amounts of added water were obtained for two soils, a sandy loam and a silt loam. From core samples taken at the conclusion of the study the ranges of total water content values calculated at the 95% confidence interval were as follows: 12.1 to 10.7 cm. and 20.6 to 18.4 cm. for the sandy loam, and 15.1 to 12.0 cm. and 17.4 to 9.0 cm. for the silt loam. Corresponding values calculated from rate‐meter readings were 11.4, 19.2, 13.2 and 13.9 cm., respectively.

About this research paper

What this paper is about

Abstract The total water content (surface cm. of water) in 4 soil columns 91 cm. in diameter and from 80 to 110 cm. in depth was estimated periodically from readings taken with portable neutron equipment. The readings were taken with the detector tube placed at various depths in a centrally located “well” formed by an aluminum tube. The relationship between meter readings and percent moisture by volume for several mineral soil types had been previously determined by a field calibration procedure. Total water content values calculated by analytical and graphical methods were comparable. Reproducible water‐depletion curves for several irrigation cycles were shown as water was removed from the soil by tomato plants. Satisfactory agreement between the calculated changes of total water content and the measured amounts of added water were obtained for two soils, a sandy loam and a silt loam. From core samples taken at the conclusion of the study the ranges of total water content values calculated at the 95% confidence interval were as follows: 12.1 to 10.7 cm. and 20.6 to 18.4 cm. for the sandy loam, and 15.1 to 12.0 cm. and 17.4 to 9.0 cm. for the silt loam. Corresponding values calculated from rate‐meter readings were 11.4, 19.2, 13.2 and 13.9 cm., respectively.

Why it matters

OpenAlex reports 4 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

Abstract The total water content (surface cm. of water) in 4 soil columns 91 cm. in diameter and from 80 to 110 cm. in depth was estimated periodically from readings taken with portable neutron equipment. The readings were taken with the detector tube placed at various depths in a centrally located “well” formed by an aluminum tube. The relationship between meter readings and percent moisture by volume for several mineral soil types had been previously determined by a field calibration procedure. Total water content values calculated by analytical and graphical methods were comparable. Reproducible water‐depletion curves for several irrigation cycles were shown as water was removed from the soil by tomato plants. Satisfactory agreement between the calculated changes of total water content and the measured amounts of added water were obtained for two soils, a sandy loam and a silt loam. From core samples taken at the conclusion of the study the ranges of total water content values calculated at the 95% confidence interval were as follows: 12.1 to 10.7 cm. and 20.6 to 18.4 cm. for the sandy loam, and 15.1 to 12.0 cm. and 17.4 to 9.0 cm. for the silt loam. Corresponding values calculated from rate‐meter readings were 11.4, 19.2, 13.2 and 13.9 cm., respectively.

Key concepts: Loam, Soil water, Water content, Neutron probe, Silt, Environmental science, Soil science, Calibration

Related papers

Back to paper searchBrowse research topicsOriginal source
The Use of Portable Neutron Equipment to Measure the Quantity of Water in Large Soil Columns — Research Paper | ScholarLens