2012Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIERequires access

~2.1 um Tm3+-Ho3+ co-doped tungsten tellurite single mode fiber laser

Kefeng Li, Guang Chun Zhang, Lili Hu, Meng Wang, Danping Chen

Open publisher page 2 citations

Abstract

We investigate the spectroscopic and lasing performance of Tm3+-Ho3+ co-doped tungsten tellurite single mode fiber operating around 2.1 μm with a commercial 800 nm diode laser pump source. The optimum doping concentration of Tm2O3 and Ho2O3 in Tm3+-Ho3+ co-doped TeO2-WO3-La2O3 (TWL) glass is 1 mol% and 0.5 mol%, respectively. The lifetime of Ho3+:5I7 level is 3.3 ms in the bulk glass. The maximum stimulated emission cross-section of Ho3+ in TWL is 10.0×10-21cm2. The tungsten tellurite single mode fibers are prepared by using rod-in-tube method. The infrared emission spectra are compared with varying fiber lengths. Tm3+-Ho3+ co-doped fiber shows weak emission at ~1.9 μm very strong emission at ~2.1 μm, which indicates efficient energy transfer from Tm3+ to Ho3+ in the fiber. The 1.47 μm emission increases with the increment of the fiber length, which means a back energy transfer from Ho3+ to Tm3+. A 106 mW continuous wave laser emission at ~2.1 μm is demonstrated from a 16 cm length of this fiber, the slope efficiency is 23%, corresponding to a 17% optical to optical efficiency. Lasing has also been achieved in <5 cm length of this fiber, making this material a promising candidate for single frequency ~2.1 μm laser sources.

About this research paper

What this paper is about

We investigate the spectroscopic and lasing performance of Tm3+-Ho3+ co-doped tungsten tellurite single mode fiber operating around 2.1 μm with a commercial 800 nm diode laser pump source. The optimum doping concentration of Tm2O3 and Ho2O3 in Tm3+-Ho3+ co-doped TeO2-WO3-La2O3 (TWL) glass is 1 mol% and 0.5 mol%, respectively. The lifetime of Ho3+:5I7 level is 3.3 ms in the bulk glass. The maximum stimulated emission cross-section of Ho3+ in TWL is 10.0×10-21cm2. The tungsten tellurite single mode fibers are prepared by using rod-in-tube method. The infrared emission spectra are compared with varying fiber lengths. Tm3+-Ho3+ co-doped fiber shows weak emission at ~1.9 μm very strong emission at ~2.1 μm, which indicates efficient energy transfer from Tm3+ to Ho3+ in the fiber. The 1.47 μm emission increases with the increment of the fiber length, which means a back energy transfer from Ho3+ to Tm3+. A 106 mW continuous wave laser emission at ~2.1 μm is demonstrated from a 16 cm length of this fiber, the slope efficiency is 23%, corresponding to a 17% optical to optical efficiency. Lasing has also been achieved in <5 cm length of this fiber, making this material a promising candidate for single frequency ~2.1 μm laser sources.

Why it matters

OpenAlex reports 2 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

We investigate the spectroscopic and lasing performance of Tm3+-Ho3+ co-doped tungsten tellurite single mode fiber operating around 2.1 μm with a commercial 800 nm diode laser pump source. The optimum doping concentration of Tm2O3 and Ho2O3 in Tm3+-Ho3+ co-doped TeO2-WO3-La2O3 (TWL) glass is 1 mol% and 0.5 mol%, respectively. The lifetime of Ho3+:5I7 level is 3.3 ms in the bulk glass. The maximum stimulated emission cross-section of Ho3+ in TWL is 10.0×10-21cm2. The tungsten tellurite single mode fibers are prepared by using rod-in-tube method. The infrared emission spectra are compared with varying fiber lengths. Tm3+-Ho3+ co-doped fiber shows weak emission at ~1.9 μm very strong emission at ~2.1 μm, which indicates efficient energy transfer from Tm3+ to Ho3+ in the fiber. The 1.47 μm emission increases with the increment of the fiber length, which means a back energy transfer from Ho3+ to Tm3+. A 106 mW continuous wave laser emission at ~2.1 μm is demonstrated from a 16 cm length of this fiber, the slope efficiency is 23%, corresponding to a 17% optical to optical efficiency. Lasing has also been achieved in <5 cm length of this fiber, making this material a promising candidate for single frequency ~2.1 μm laser sources.

Key concepts: Analytical Chemistry (journal), Tungsten, Lasing threshold, Atomic physics, Physics, Materials science, Laser, Chemistry

Related papers

Back to paper searchBrowse research topicsOriginal source
~2.1 um Tm3+-Ho3+ co-doped tungsten tellurite single mode fiber laser — Research Paper | ScholarLens