2006•Journal of Surveying EngineeringRequires access

Evaluation of a GPS-Based Approach for Rapid and Precise Determination of Geodetic/Astronomical Azimuth

C. C. Chang, Wu-Yang Tsai

Open publisher page 15 citations

Abstract

The rapid and precise determination of the azimuth information, purely based on the satellite positioning technology of global positioning system (GPS), is tested and evaluated by this paper. The main consideration of using GPS for the azimuth determination is expected to replace the traditional astronomical azimuth measurement, which is believed to be time-consuming and weather-dependent. A GPS approach is simply based on setting up the GPS receivers at the two ends of a baseline, recording and processing the phase observable, and converting its coordinate solution into an azimuth with the inverse geodetic formulas. This type of azimuth obtained by the GPS static solution has been assessed to be well consistent with the astronomical azimuth by a level of better than ±1″. The GPS kinematic mode of azimuth value, however, is biased from the standard value for a RMS error of ±9″. The correction of the deflection of the vertical, theoretically required by the geodetic and astronomical azimuth conversion, is also implemented and found to be only effective at the observation site where the ηtanφ value is higher than the estimation accuracy of the η value provided by a gravimetric geoid model.

About this research paper

What this paper is about

The rapid and precise determination of the azimuth information, purely based on the satellite positioning technology of global positioning system (GPS), is tested and evaluated by this paper. The main consideration of using GPS for the azimuth determination is expected to replace the traditional astronomical azimuth measurement, which is believed to be time-consuming and weather-dependent. A GPS approach is simply based on setting up the GPS receivers at the two ends of a baseline, recording and processing the phase observable, and converting its coordinate solution into an azimuth with the inverse geodetic formulas. This type of azimuth obtained by the GPS static solution has been assessed to be well consistent with the astronomical azimuth by a level of better than ±1″. The GPS kinematic mode of azimuth value, however, is biased from the standard value for a RMS error of ±9″. The correction of the deflection of the vertical, theoretically required by the geodetic and astronomical azimuth conversion, is also implemented and found to be only effective at the observation site where the ηtanφ value is higher than the estimation accuracy of the η value provided by a gravimetric geoid model.

Why it matters

OpenAlex reports 15 citations for this work. Citation counts describe recorded attention and do not establish research quality.

Key contribution

A contribution statement is not available in the OpenAlex record.

Method / approach

Method details are not available in the OpenAlex metadata.

Main findings

Findings are not separately available in the OpenAlex metadata.

Limitations

Limitations are not available in the OpenAlex metadata.

Applications

Application details are not available in the OpenAlex metadata.

Available abstract

The rapid and precise determination of the azimuth information, purely based on the satellite positioning technology of global positioning system (GPS), is tested and evaluated by this paper. The main consideration of using GPS for the azimuth determination is expected to replace the traditional astronomical azimuth measurement, which is believed to be time-consuming and weather-dependent. A GPS approach is simply based on setting up the GPS receivers at the two ends of a baseline, recording and processing the phase observable, and converting its coordinate solution into an azimuth with the inverse geodetic formulas. This type of azimuth obtained by the GPS static solution has been assessed to be well consistent with the astronomical azimuth by a level of better than ±1″. The GPS kinematic mode of azimuth value, however, is biased from the standard value for a RMS error of ±9″. The correction of the deflection of the vertical, theoretically required by the geodetic and astronomical azimuth conversion, is also implemented and found to be only effective at the observation site where the ηtanφ value is higher than the estimation accuracy of the η value provided by a gravimetric geoid model.

Key concepts: Azimuth, Geodesy, Global Positioning System, Geodetic datum, Remote sensing, Kinematics, Vertical deflection, Geology

Related papers

Back to paper searchBrowse research topicsOriginal source
Evaluation of a GPS-Based Approach for Rapid and Precise Determination of Geodetic/Astronomical Azimuth — Research Paper | ScholarLens