Evaluation of Hydroxyl radical Formation and Energy Distribution in Photolysis Reactor
Sang-Geon Nam, Anna Hwang, Sang‐Hyun Cho, Myunghee Lim, Jee-Hyeong Kim
Abstract
Sang-Geon Nam, Anna Hwang, Sang‐Hyun Cho, Myunghee Lim, Jee-Hyeong Kim
Abstract
본 연구에서는 광 반응기 내부의 영향반경을 평가하기 위해 자외선(UV-C) 램프의 강도와 photochemical에 의한 OH 라디칼 생성량을 측정하였다. 또한 $TiO_2$ (Degussa P-25)를 농도별로 첨가하여 자외선 램프의 영향반경을 측정하였다. 광 반응기는 아크릴 재질의 bath 타입을 사용하였고, 254 nm의 파장을 가진 UV-C 자외선 램프를(SANKYO DENKI, 지름 : 2.2 cm, 길이 : 18.5 cm) 사용하였다. 램프의 소비전력은 10.5 W이고, OH 라디칼 생성량을 측정하기 위해 KI dosimetry를 사용하였다. 실험 결과로부터 광 반응기에서 자외선의 강도가 0.367 mW/ $cm^2$ 이상 조사되어야하고, 거리는 13 cm 이내에서 OH 라디칼 생성에 영향을 미치는 것으로 나타났다. 또한 광촉매 반응기에서는 촉매의 농도로 인해 자외선의 영향반경이 매우 감소하는 것을 확인할 수 있었다. In this study, photochemical effects (OH radical formation) in the photoreactor was investigated to analyze UV-C intensity distribution. In addition, The influence radius of the UV-C lamp was measured at various dose of $TiO_2$ (Degussa P-25). The photoreactor used in this study was bath type reactor which is made by acrylic and the UV-C lamp (SANKYO DENKI, wavelength : 254 nm, Diameter : 2.2 cm, Length : 18.5 cm) was used as photo source. The maximum electric power consumption of the UV lamp was 10.5 W. The OH radical formation by UV-C was measured by KI dosimetry methods. From the results, the effective OH radical formation was occurred under the following condition. The reasonable distance of UV-C lamp is within 13 cm and the intensity of UV-C lamp should be more than 0.367 mW/ $cm^2$ . Moreover, the concentration of catalyst affects on the influence radius of the UV lamp.
OpenAlex reports 1 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
본 연구에서는 광 반응기 내부의 영향반경을 평가하기 위해 자외선(UV-C) 램프의 강도와 photochemical에 의한 OH 라디칼 생성량을 측정하였다. 또한 $TiO_2$ (Degussa P-25)를 농도별로 첨가하여 자외선 램프의 영향반경을 측정하였다. 광 반응기는 아크릴 재질의 bath 타입을 사용하였고, 254 nm의 파장을 가진 UV-C 자외선 램프를(SANKYO DENKI, 지름 : 2.2 cm, 길이 : 18.5 cm) 사용하였다. 램프의 소비전력은 10.5 W이고, OH 라디칼 생성량을 측정하기 위해 KI dosimetry를 사용하였다. 실험 결과로부터 광 반응기에서 자외선의 강도가 0.367 mW/ $cm^2$ 이상 조사되어야하고, 거리는 13 cm 이내에서 OH 라디칼 생성에 영향을 미치는 것으로 나타났다. 또한 광촉매 반응기에서는 촉매의 농도로 인해 자외선의 영향반경이 매우 감소하는 것을 확인할 수 있었다. In this study, photochemical effects (OH radical formation) in the photoreactor was investigated to analyze UV-C intensity distribution. In addition, The influence radius of the UV-C lamp was measured at various dose of $TiO_2$ (Degussa P-25). The photoreactor used in this study was bath type reactor which is made by acrylic and the UV-C lamp (SANKYO DENKI, wavelength : 254 nm, Diameter : 2.2 cm, Length : 18.5 cm) was used as photo source. The maximum electric power consumption of the UV lamp was 10.5 W. The OH radical formation by UV-C was measured by KI dosimetry methods. From the results, the effective OH radical formation was occurred under the following condition. The reasonable distance of UV-C lamp is within 13 cm and the intensity of UV-C lamp should be more than 0.367 mW/ $cm^2$ . Moreover, the concentration of catalyst affects on the influence radius of the UV lamp.
Key concepts: Photodissociation, Chemistry, Irradiation, Photochemistry, Hydroxyl radical, Wavelength, Analytical Chemistry (journal), Materials science