Low-Temperature Synthesis of Cordierite Using Magnesite

Cordierite (2MgO·2Al2O3·5SiO2) has a low density of 2.2 g/cm3due to its high magnesium content. Because of its low thermal expansion coefficient of 1~2 x10-6/°C, many studies are being conducted on the synthesis of cordierite with the expensive petalite as a replacement for lithium alumina silicate-based heat-resistant materials. The cordierite can be synthesized over a wide range: SiO2at 50~70%, Al2O3at 20~40%, and MgO at 10~30%. In this study, the range of chemical composition and temperature of cordierite synthesis is thoroughly investigated. In particular, we use natural materials (magnesite, kaolin and clay) to examine how thermal properties are affected by changes in crystal phase arising from the varying composition of MgO, SiO2and Al2O3.We focused on factors leading to an increase in the rate of cordierite synthesis at temperatures below 1280°C. From observing the synthetic rate over 1250~1280°C, the sintered body at 1280°C had a high synthetic rate greater than 80%. Magnesite was ball milled at constant intervals, and mean particle size was controlled to improve the synthetic rate of cordierite. As a result, the cordierite synthetic rate increased by more than 15% with decreasing the mean particle size of magnesite.