Numerical Groundwater Flow Modeling of the Coastal Plain Sand Aquifer, Akwa Ibom State, SE Nigeria
Aniekan Edet, Ramadan Abdelaziz, Broder J. Merkel, C.S. Okereke, T. N. Nganje
Abstract
Open-access reader
Aniekan Edet, Ramadan Abdelaziz, Broder J. Merkel, C.S. Okereke, T. N. Nganje
Abstract
Open-access reader
Akwa Ibom State is located in the Niger delta region of Nigeria. The coastal plain sand aquifer, which underlies the area, is the major source of potable water for domestic, agricultural, and industrial use. The increase in demand for water has led to an increased exploitation of the aquifer in the last few years. Hence it is essential to quantify the amount of exploitable water in the aquifer. To achieve this goal, a regional numerical groundwater flow model using MODFLOW was calibrated under steady-state conditions to determine the aquifer’s hydraulic conductivity (K) and the recharge characteristics of the area. The hydraulic conductivity and recharge values from the pilot points calibration ranged from 1 to 75 m/d and 5.89 × 10-6 m3/d to1.23 × 10-4 m3/d. The calculations of the model showed that the average recharge rate amounts 0.40l/s/km2 or 12.60 mm/year. The estimated recharge suggests a high groundwater potential for the area. This is the first time that such a study has been carried out in the area, and it will serve as an important basis for future groundwater management and simulation of transient groundwater flow modeling in Akwa Ibom State.
OpenAlex reports 21 citations for this work. Citation counts describe recorded attention and do not establish research quality.
A contribution statement is not available in the OpenAlex record.
Method details are not available in the OpenAlex metadata.
Findings are not separately available in the OpenAlex metadata.
Limitations are not available in the OpenAlex metadata.
Application details are not available in the OpenAlex metadata.
Akwa Ibom State is located in the Niger delta region of Nigeria. The coastal plain sand aquifer, which underlies the area, is the major source of potable water for domestic, agricultural, and industrial use. The increase in demand for water has led to an increased exploitation of the aquifer in the last few years. Hence it is essential to quantify the amount of exploitable water in the aquifer. To achieve this goal, a regional numerical groundwater flow model using MODFLOW was calibrated under steady-state conditions to determine the aquifer’s hydraulic conductivity (K) and the recharge characteristics of the area. The hydraulic conductivity and recharge values from the pilot points calibration ranged from 1 to 75 m/d and 5.89 × 10-6 m3/d to1.23 × 10-4 m3/d. The calculations of the model showed that the average recharge rate amounts 0.40l/s/km2 or 12.60 mm/year. The estimated recharge suggests a high groundwater potential for the area. This is the first time that such a study has been carried out in the area, and it will serve as an important basis for future groundwater management and simulation of transient groundwater flow modeling in Akwa Ibom State.
Key concepts: Groundwater recharge, MODFLOW, Aquifer, Groundwater, Groundwater model, Hydrology (agriculture), Hydraulic conductivity, Groundwater flow